BUILT FOR OUR
DEMANDING ENVIRONMENTS
These PREMERA COATING SYSTEMS are ideal for high-use industrial structures, manufacturing facilities, warehouses and distribution centers, parking structures, commercial and institutional facilities, federal, state, and municipal facilities, multifamily properties, residential homes of all types, new construction, high-traffic environments, and building restoration projects.
CONCRETE STRUCTURE MOISTURE CONTROL
Concrete moisture can disrupt coatings, create efflorescence, and contribute to premature system failure. The correct approach depends on where moisture is moving and how the finished surface will be used.
FLOOR MOISTURE CONTROL - STEP 1
EasyMVB is a single-component, water-based concrete treatment formulated to penetrate and react within the concrete pore structure. It seals and densifies cementitious surfaces, helps address vapor transmission and hydrostatic pressure challenges, and reduces the risk of moisture-related out-gassing, pinholes, and blistering beneath subsequent coatings.
Burnished finish: 200-250 sq. ft./gal.
Allow at least 4 hours, or until completely dry, before subsequent Premera products.
- Zero VOC formulation
- Reduces porosity and increases durability of concrete surface
- Helps prevent efflorescence
- Improves concrete quality, durability, liquid repellency
- Reduces risk of moisture out-gassing, pin-holing, and blisters in top coats
- As a moisture vapor barrier under coatings
- As a water resistant surface treatment for concrete and masonry
- As a sealer for micro leaks in floors, walls, and basements
- As a moisture barrier to protect different types of flooring / coverings
- As part of liquid and gas barrier used in concrete containment structures
- Rehabilitation of deteriorated / contaminated concrete; waterproofing below grade
WALL MOISTURE STRATEGIES | STEP 1A | STEP 1B
Interior moisture control focuses on treating the concrete and reducing moisture movement into occupied space. Exterior protection must consider rain exposure while preserving a path for water vapor to escape.
A penetrating, single-component, water-based moisture vapor barrier treatment. HLT reacts within concrete to seal, densify, and harden the surface. It can reduce porosity, prevent efflorescence, improve water resistance, and address moisture movement in walls and basements.
Use: Interior concrete or masonry with moisture vapor, dampness, or efflorescence.
- Zero VOC formulation
- Reduces concrete porosity and increases surface durability
- Helps prevent efflorescence
- Improves concrete quality, durability, and liquid repellency
- Reduces moisture out-gassing, pin-holing, and blistering in topcoats
- Moisture vapor barrier under coatings
- Water-resistant treatment for concrete and masonry
- Sealer for micro leaks in floors, walls, and basements
- Moisture barrier beneath flooring and floor coverings
- Part of liquid/gas barriers in concrete containment structures
- Rehabilitation of deteriorated or contaminated concrete; below-grade waterproofing
A fast-drying, single-component acrylic sealer used to seal pores and capillaries. For the proposed exterior application, it provides a breathable protective approach so moisture vapor is not trapped within the wall.
Use: Exterior concrete or masonry needing surface protection while maintaining vapor release. Confirm suitability for the wall assembly and exposure.
- Stain and water repellent; very fast drying and breathable
- Suitable for most natural and artificial stone, concrete, and masonry
- Penetrates the substrate surface and enhances natural substrate colors
- Helps repel moisture, stains, and dirt from within the substrate
- Long-lasting, easy to clean, and reduces maintenance costs
- Protection against moisture, stains, and dirt
- Surface enhancement for masonry, stone, and concrete
- Suitable sealer beneath PREMERA T2 MCM topcoats
PROTECTIVE COATING OPTIONS
Both recommended systems create a clear quartz-mineral protective finish for concrete floors exposed to continuous foot traffic, rolling equipment, and forklifts. The correct choice depends on the required performance, finish, cleaning environment, and return-to-service goals.
BUILT FOR ACTIVE INDUSTRIAL FLOORS
Both options: Designed for demanding, high-traffic areas such as data centers, warehouses, and production facilities. After the required cure, the finished floor supports continuous foot traffic, rolling equipment, and forklift use while providing a durable, easy-clean protective surface.
Choose CS1 for poured concrete when the priority is efficient installation, accelerated return to service, high-traffic durability, and a clear, easy-clean finish.
- Accelerator
- Odor Block
Choose T2 MCM when the floor requires enhanced protective performance, controlled matte appearance, and antimicrobial functionality.
- Accelerator
- Antimicrobial
- Liquid Matte
- Powder Matte
- Non-Skid
- Odor Block
SYSTEM INTEGRATION | EPOXY/SOLVENT-BASED COATINGS
This system is designed to address moisture vapor conditions up to the specified system limit while helping reduce moisture-related adhesion failures.
PREMERA EPOXY / SOLVENT-BASED FLOOR SYSTEM
Five-layer system shown from finished surface to structural concrete.
TECHNICAL ENVIRONMENTS | WHY DATA CENTERS NEED CONTROL
Modern mission-critical data centers operate as highly controlled environments where cleanliness, temperature, humidity, and airborne particulate levels can directly affect equipment reliability and cooling performance. Airborne particulates, moisture, and environmental contaminants can contribute to hardware degradation and operational risk.
CONTROLLED ENVIRONMENT PERFORMANCE
SURFACE DEGRADATION VS. PARTICULATE-CONTROL PROTECTION
KEY INDUSTRIES & BIOLOGICAL SECTORS
Microelectronics
Biotech, & Med Device
Processing
Military Hardware
Hospitals, & Labs
INDEPENDENT ANTIMICROBIAL TESTING
Laboratory results describe antimicrobial activity under the specified test conditions and apply only to the tested coating. These results should not be interpreted as protection of users or others from bacteria, viruses, germs, or other disease-causing organisms.
CLEAN ROOM | PREMERA COATING SYSTEMS
PREMERA T2 MCM & T9 VFC (for vinyl flooring) with Anti-Microbial Agent can be used to create durable, cleanable protective surfaces as part of a controlled-environment or clean-room system.
PERFECT PREPARATION:
Protect the floors, glass, and all surfaces not intended to receive the coating. Complete the ceiling and wall applications first. Once those surfaces are finished, remove the floor protection and apply the floor coating last.
PREMERA provides a practical way to create a continuous, seamlessly coated protective surface from ceiling to floor within an existing building structure.
THE FINISHED PROTECTIVE ENVELOPE
APPLICATION METHOD | CLEAN ROOM SEQUENCE
TECHNICAL DATA SHEETS (TDS) & SAFETY DATA SHEETS (SDS) DIRECTORY
ANTIMICROBIAL SURFACE PROTECTION | PREMERA SOL GELS
Exact technical parameters reproduced from the PREMERA Antimicrobial Surface Protection technical portfolio.
DURABLE INORGANIC SOL-GEL COATINGS
SURFACE PROTECTION AGAINST ODOR, MOLD & MILDEW
TECHNICAL REFERENCE DIRECTORY
Select a technical reference below to open the supporting documentation.
IMPORTANT INFORMATION & DISCLAIMER
GENERAL INFORMATION
This presentation is provided by Industrial Surface Solutions® and PREMERA Coating Systems solely for general informational, educational, and product-overview purposes. It is not intended to constitute a complete product specification, project specification, engineering or architectural recommendation, medical or diagnostic advice, infection-control protocol, regulatory determination, or substitute for professional consultation.
TECHNICAL INFORMATION & PROJECT CONDITIONS
Product descriptions, performance characteristics, application methods, coverage rates, test results, illustrations, system configurations, and other technical information are summaries and may not include every limitation, condition, specification, substrate requirement, environmental consideration, or application variable applicable to a particular project. Laboratory or third-party test results describe performance under the specific conditions tested and should not be interpreted as a guarantee of identical performance under all field conditions.
USER RESPONSIBILITY
Users, contractors, specifiers, owners, architects, engineers, facility professionals, and other parties are responsible for determining the suitability of each product and coating system for the intended substrate, environment, application, and use. Always consult the current Technical Data Sheet (TDS), Safety Data Sheet (SDS), written application instructions, applicable codes and regulations, and project-specific requirements before specifying, purchasing, applying, or using any product. Appropriate testing of the actual substrate and site conditions should be performed before full application.
WARRANTY & RELIANCE
TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, THE INFORMATION CONTAINED IN THIS PRESENTATION IS PROVIDED WITHOUT ANY EXPRESS OR IMPLIED WARRANTY ARISING FROM THIS PRESENTATION, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO STATEMENT IN THIS PRESENTATION IS INTENDED TO CREATE OR EXPAND A PRODUCT WARRANTY, PERFORMANCE GUARANTEE, OR CONTRACTUAL OBLIGATION OF INDUSTRIAL SURFACE SOLUTIONS® OR PREMERA COATING SYSTEMS.
ANTIMICROBIAL & HEALTH-RELATED INFORMATION
Nothing in this presentation should be interpreted as representing that a PREMERA product prevents, treats, diagnoses, cures, or eliminates disease or protects persons from bacteria, viruses, pathogens, or other disease-causing organisms. Where antimicrobial properties are discussed, users should refer to the applicable product documentation, test reports, regulatory information, and labeling for the specific scope and limitations of those properties.
CURRENT DOCUMENTATION CONTROLS
Industrial Surface Solutions® and PREMERA Coating Systems reserve the right to revise product information, specifications, formulations, recommendations, and technical documentation without notice. Current product documentation should always control over information summarized in this presentation.
FROM PHYSICAL INFRASTRUCTURE
TO DIGITAL INFRASTRUCTURE
Industrial Surface Solutions® extends beyond protecting the physical data center environment. We provide access to data center infrastructure, networking, computing, collaboration technology, hardware, software, IT services and commercial financing solutions supporting connected and mission-critical operations.
TECHNOLOGY FOR THE COMPLETE FACILITY
Infrastructure, networking, computing, collaboration and technology integration solutions supporting modern data center operations.
LENOVO 360
Infrastructure solutions supporting data center, server, storage, hybrid cloud, edge environments and commercial endpoint deployments.
EXPLORE LENOVO 360 →ALLIED TELESIS
Switching, wireless, firewalls, routing, network adapters, media conversion, transceivers and network-management technologies supporting connected infrastructure.
MICROSOFT SURFACE
Surface business computing solutions supporting mobile professionals, management teams and connected business operations.
SMART BUSINESS
Interactive displays and collaboration technologies supporting meetings, training, remote collaboration and connected workspaces.
SALAMANDER DESIGNS
Commercial technology furniture and integration solutions supporting displays, collaboration environments and professionally organized technology spaces.
FROM PROCUREMENT TO IMPLEMENTATION
Industrial Surface Solutions® provides access to a broad technology portfolio spanning hardware, software, IT services and commercial financing.
HARDWARE PRODUCTS
Access to an extensive portfolio of technology hardware supporting data center, business, infrastructure and operational requirements.
SOFTWARE SUPPLIERS
Access to software solutions from hundreds of suppliers supporting infrastructure, business operations and organizational requirements.
IT SERVICES
Technology services supporting implementation, infrastructure, systems and ongoing organizational technology requirements.
COMMERCIAL FINANCING
Financing options supporting eligible technology, hardware, software, services and commercial project requirements.
PROTECTING THE PHYSICAL INFRASTRUCTURE.
SUPPORTING THE DIGITAL INFRASTRUCTURE.
Facility solutions, technology infrastructure, procurement and financing resources brought together through one experienced source.
BUILD THE RIGHT
DATA CENTER SOLUTION.
Whether the requirement involves facility protection, network infrastructure, computing, more than 200,000 hardware products, more than 500 software suppliers, IT services or commercial financing, Industrial Surface Solutions® can help identify the right resources for your project.