World’s Best Graffiti Removal System – Heritage Graffiti Remover – (1 Quart)

INDUSTRIAL SURFACE SOLUTIONS

Heritage Graffiti Remover is specifically designed for sensitive, historic, and important buildings, to remove graffiti from stonework, brickwork, and masonry without damage. This product is effective the first time, every time, and requires very low pressure to remove softened graffiti from the surface. Importantly, Heritage Graffiti Remover will rinse very easily to avoid the presence of insoluble salts being left on the masonry. Remove all types of spray can paint from porous stone and concrete surfaces, including cinderblock, split face block, and exposed aggregate. Safe and effective to use on all types of natural stone (such as limestone, granite, marble, and terrazzo). Also, highly effective on some painted and coated surfaces such as signs as well as stainless steel, trees, and most plastics.

Features & Benefits

• Fast-acting penetrating formula encapsulates and dissolves spray can and other stains from behind as well as the front.
• Easily rinsed with a small pressure washer requiring very little rinsing water. Any resultant runoff is a readily biodegradable gray water soap that can be left to biodegrade. Recycled or further diluted for use in gardens etc.
• No shadows, no damage, no harsh scrubbing required.
• Pleasant smelling and nontoxic.
• Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment.
• May be used on painted surfaces as well as natural surfaces.

Product Use Instructions 

HERITAGE GRAFFITI REMOVER is applied to the surface with a nylon brush, broom, or pump-up sprayer, 3 times at 3-minute intervals, liberally flooding the graffiti/stain with the product. For typical graffiti, approximately three minutes after the final application, rinse using a hot or cold pressure washer (hot is best) at low pressure. If one is not available, then a stiff nylon brush and bucket of water may suffice. Agitation, as you apply this product, can be of great assistance.

Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray cans. On older/thicker graffiti patience is the key. Keep the graffiti wet with the product, as long as possible before rinsing. Do not blast too close, in order to remove the graffiti, as it may cause damage and will possibly only remove a small percentage more. Remember, a pressure washer in this instance is really only a quick-release rinse of the dissolved graffiti and not the primary means of cleaning. Ideally use 1500 – 2000 psi with a 15º or 25º fan jet at about 6 inches from the surface. Do not blast or use ‘turbo’ type nozzles that risk doing damage. When rinsing dissolved graffiti with a pressure washer try to remove a LITTLE of the graffiti from the bottom of the tag without wetting the whole area. If satisfied, then proceed to full scale. Wash the whole area from top to bottom.

Remember, if the remover has not done its job then no amount of ‘blasting’ will fix the problem. Failures are usually a result of not flood coating adequately and not leaving the product on long enough and cannot be resolved by blasting too close or at higher pressures.

Coverage Guidelines

1 gallon of Heritage Graffiti Remover will remove approximately 200 sq ft per gallon (of typical graffiti) on bare brick, stone, and masonry surfaces. Exact coverage varies depending on the type of stain and the porosity of the surface material.

DOCUMENTS

INSTRUCTIONS

SDS DATA SHEET

For Questions, please email or call us direct at 1-866-946-3878