World’s Best Graffiti Removal System – Transgel Paint & Graffiti Remover (1 Gallon)

INDUSTRIAL SURFACE SOLUTIONS

Transgel Paint and Graffiti Remover is a highly effective, safe, and Biodegradable paint remover for older, hardened, and sunbaked spray paint from masonry, metal, asphalt, and timber surfaces. Recommended for the removal of graffiti from road surfaces, including asphalt, tarmac, or bitumen without degradation of the road surface. Can be used on unpainted metals and pre-painted steel fencing.

Transgel will remove hard sunbaked paints on trains left in yards and thicker spray cans and acrylic murals from buildings. Transgel is particularly useful for removing old and hardened white and yellow spray paint.

Features & Benefits

• Fast acting and non-damaging.
• Works on all building surfaces, from porous cinderblock to smooth paintwork, powder coat and asphalt.
• Virtually odorless and non-toxic.
• Gel consistency stays wetter longer ensuring maximum dwell time in order to crinkle thicker/older paint

Product Use Instructions 

For typical removal jobs on graffiti and other paint, apply thickly and leave for at least 20 minutes of dwell time. Longer dwell times may be necessary for some circumstances. Agitate with a stiff nylon brush or scrub pad if the graffiti is very thick. Rinse with high-pressure water. The best results are obtained using a hot water pressure washer.

When removing older, multilayered graffiti and acrylic paint, Transgel can be left to work overnight as it will generally not dry out. This should only be done where it is safe to do so. Once the thick layers of graffiti have been removed from porous surfaces using Transgel, the remaining graffiti residue can be removed using Bare Brick Stone and Masonry Graffiti Remover.

Coverage Guidelines

1 gallon of Transgel Paint and Graffiti Remover will remove approximately:

• 80 – 100 sq ft per gallon on sandstone, limestone, or other soft absorbent surfaces, or on thicker paints where additional coats are required.
• 150 sq ft per gallon (per three coats on typical graffiti) for concrete.
• 80 – 100 sq ft per gallon on sandstone, limestone, or other soft absorbent surfaces, or on thicker paints where additional coats are required.

Exact coverage varies depending on the porosity of the surface, the material, and the type of paint being removed.

DOCUMENTS

INSTRUCTIONS

SDS DATA SHEET

For Questions, please email or call us direct at 1-866-946-3878