CHLOR*RID SP8 GEL

Chlor*Rid™ SP8 is a revolutionary two step surface decontamination process, comprised of two
products (Chlor*Rid™ SP8 & Chlor*Rid™ SP8 Rinse) that clean at the microscopic level to remove
surface contaminants including, but not limited to:
Chlor*Rid™ SP8 process can be used after surface preparation and prior to protective coating
applications. The process is for use wherever a protective coating will be applied to a metal
substrate and extended coating surface life is desired.
Coatings applied over the Chlor*Rid™ SP8 cleaned process can significantly outperform coatings
applied over substrates prepared by conventional surface preparation standards.
Chlor*Rid™ SP8 is “coating-neutral.” It is not a film-former and does not leave any residue on the
substrate. It can be used with any coating system and can be used before and after welding.
Chlor*Rid™ SP8 improves weld strength by removing contaminants that negatively affect
puddling and weld porosity and can clean weld flame residue and other surface contaminations
after welds have cooled.

APPLICATION PROCEDURES

TECHNICAL DATA SHEET

SDS DATA SHEET