SWISSMEX Acetone Sprayer DS-8350
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 147.50
SWISSMEX Acetone Sprayer DS-8350 quantity
$ 147.50
Nukote Coating Systems - Premera FP1 Fusion Primer for Concrete - (1-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (1-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 300 – 400 ft2/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Nukote Coating Systems - Premera FP1 Fusion Primer for Concrete - (1-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (1-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 300 – 400 ft2/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC. quantity
$ 175.00
Nukote Coating Systems - Premera QUICK SEAL AT1 (1-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 150-600 ft2/gal - Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 75.00
Nukote Coating Systems - Premera QUICK SEAL AT1 (1-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 150-600 ft2/gal - Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal. quantity
$ 75.00
Nukote Coating Systems - Premera Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 15.00
Nukote Coating Systems - Premera Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size. quantity
$ 15.00
Nukote Coating Systems – Premera QUICK SEAL AT1 (50-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 7,500-30,000 ft2/50gal – Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 3,750.00
Nukote Coating Systems – Premera QUICK SEAL AT1 (50-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 7,500-30,000 ft2/50gal – Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal. quantity
$ 3,750.00
Premera Coatings - Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 15.00
Premera Coatings - Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size. quantity
$ 15.00
Continue Shopping