LEGACY PRODUCTS
Legacy Products
CrownGloss 8090
8090 CrownGloss™ is a clear 2-component high-performance, water-based, aliphatic urethane floor and wall finish coat. Approximately 85 gloss read at a 60-degree angle with good resistance to chemicals, stains, abrasions, and scratches.
CrownSatin 8091
8091 CrownSatin™ is a clear 2-component high-performance, water-based, aliphatic urethane floor coating. Commercial applications generally are recoated every 1-5 years depending on conditions. Approximately 40 – 60 gloss read at a 60-degree angle with good resistance to chemicals, abrasions, and scratches.
CrownMatte 8092
8092 CrownMatte™ is a clear 2-component high-performance, water-based, aliphatic urethane floor and wall coating. Commercial applications generally are recoated every 1-5 years depending on conditions. Approximately 15 – 30 gloss read at a 60-degree angle with good resistance to chemicals, abrasions, and scratches.
CrownCrack 7300
CrownCrack 7300 is a 2-component, low odor, liquid applied, polyurethane-alloy concrete repair system designed to repair concrete and masonry substrates. The new surface will protect concrete from weather, corrosion, erosion, freeze/thaw spalling and chemical attack.
CrownCaulk 82A 7136
7126 CrownFlex HA is a two-component, rapid setting, self-leveling, 100% solids, aliphatic polyurea joint sealant, and crack filler. It features a combination of excellent adhesion and elongation.
CrownCaulk HA 7126
7126 CrownFlex HA is a two-component, rapid setting, self-leveling, 100% solids, aliphatic polyurea joint sealant, and crack filler. It features a combination of excellent adhesion and elongation.
CrownFlex 7260
CrownFlex 7260 is a 2-component, fast setting, fast curing, solvent free, flexible, high performance, and high solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.
CrownCrete U 810 Skim Coat
CrownCrete U™ SC (Skim Coat) Product No. 810 is a 3-part urethane polymer concrete coating flooring product. This product is easily applied with squeegees, brushes, or rollers depending on the desired look. CrownCrete U SC is a heavy duty pigmented coating typically applied 8 to 16 mils thick depending on the design requirements. It is an all-purpose product designed to be used as a primer, mid-coat, topcoat or seal coat for pigmented broadcast systems. It can also be used for patching and coving when mixed with suitable aggregates.
CrownCrete-U 818 SL 1/8″
CrownCrete U™ 1/8” SL Product No. 818 is a 3-part urethane polymer concrete self-leveling product. It is a self-leveling slurry applied at 1/8” thick depending on design requirements. It is designed to withstand aggressive chemical attack, thermal shock resistance, or as an underlayment providing superior functional floor.
CrownCrete-U 814 SL 1/4″
CrownCrete U™ 1/4” Slurry Product No. 814 is a 3-part self-leveling, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy duty slurry cementitious urethane flooring material designed to be typically applied at ¼” thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment.
CrownCrete-U 815 Slurry
CrownCrete U™ Slurry Grade Product No. 815 is a 3-part, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy-duty slurry cementitious urethane flooring material designed to be typically applied at 1/8” to 1/4″ thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment
CrownCrete-U 838 TG
CrownCrete U™ TG (Trowel Grade) Product No. 838 is a 3-part urethane polymer concrete trowel grade product. It is a high density packed heavy duty system applied at 3/8” thick depending upon design requirements. It is formulated to withstand the aggressive environments offering excellent chemical resistance and superior thermal shock resistance with top of the line functional performances of the CrownCrete U family.
CrownCrete-U 839 Screed Grade
CrownCrete U™ Screed Product No. 839 is a 3-part, urethane polymer concrete. It is a heavy-duty rake and trowel applied or by the use of a screed box and trowel finished from a ¼” to ½” thickness. This product is part of CrownCrete U ™ family designed for aggressive environment area while offering the ease of application and quick return to services. The product can use used as a stand-alone or system design for looks and performances.
CrownCrete-U 811 Covebase
CrownCrete U™ Cove Product No. 811 is a 3-part urethane polymer concrete Cove Base product. It is designed to withstand aggressive chemical attack, thermal shock resistance, and can be used as a patching materials. CrownCrete U Cove is an integral part of the CrownCrete U flooring family of products. The vertical portion can be installed to any height at 1/16″ to 1/4″ thickness.
CrownCrete-U Accelerator
Great to promote in cold temperature cure. Available Upon Request.
CrownPro 7000
7000 CrownPro topcoat is a two-component abrasion, chemical, and stain-resistant, fast-curing aliphatic polyaspartic polyurea topcoat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat.
CrownPro 7072 SC
CrownPro 7072 SC is an aliphatic polyaspartic, environmentally friendly surface topcoat for several systems. CrownPro 7072SC is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards.
CrownPro 7072
7072 CrownPro is a two-component abrasion, chemical, and stain-resistant, fast-curing polyaspartic topcoat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat.
CrownPro 8072
CrownPro 8072 is an aliphatic polyaspartic, environmentally friendly surface topcoat for flooring systems . CrownPro 8072 is quick curing and specifically formulated to be installed in thin film applications. It is designed for use in Southern California and is in compliance with SCAQMD air quality standards for Industrial Applications.
CrownPro™ 8340
8340 CrownPro™ is a clear, 2-component, high solids, solvent based polyaspartic coating product. It is a tough, durable, UV-stable coating that has been specifically engineered to be used as a topcoat sealant for all Crown Polymers floor coating systems. The CrownPro 8340 delivers excellent chemical and abrasion resistance while providing an added protective layer to prolong the longevity of epoxy-based coatings. 8340 CrownPro is used as an upgraded topcoat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories, and research facilities, hospital and health care, wine and spirit processing, and other facilities subjected to heavy foot traffic, forklift traffic and chemical attack. It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). FED VOC Compliant.
8341 CrownPro™ Polyaspartic Solvent Borne High Solids Topcoat
8341 CrownPro™ is a clear, 2-component, high solids, solvent-based polyaspartic coating product. It is a tough, durable, UV-stable coating that has been specifically engineered to be used as a topcoat sealant for all Crown Polymers floor coating systems. The 8341 CrownPro™ delivers excellent chemical and abrasion resistance while providing an added protective layer to prolong the longevity of epoxy-based coatings. 8341 CrownPro™ is used as an upgraded top coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack.
8015 CrownPro™
8015 CrownPro is a two-component, short working time, abrasion, chemical, and stain-resistant polyaspartic topcoat. It is available in clear gloss. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat. It is resistant to Skydrol, betadine, and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy flooring systems providing an added protective layer to prolong the longevity of the flooring system.
8020 CrownPro™
8020 CrownPro is a two-component abrasion, chemical, and stain-resistant polyaspartic topcoat. It is available in clear gloss. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat. It is resistant to Skydrol, betadine, and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy flooring systems providing an added protective layer to prolong the longevity of the flooring system.
CrownShield 301® Economical Thru-Product™
301 CrownShield is a two-component general purpose clear epoxy primer, coating, and flooring mortar binder for broadcast and hand troweled or power troweled systems. It is economical, low viscosity, low odor, 100% solids thermosetting epoxy. It’s a general-purpose epoxy requiring upgraded topcoats and finish coats for superior chemical and abrasion resistance, such as 8320 CrownShield® Superior All-n-One Epoxy Thru-Product™ or 8110 CrownSeal™ CRU.
CrownStone 310
310 CrownStone is a two-component clear amber coating product. It is a low viscosity, low odor, moisture-insensitive epoxy. As an epoxy primer it can be used with CrownStone TD system. It requires an upgraded top coat or finish coat for superior chemical and abrasion resistance
CrownShield 320 ® General Purpose Thru-Product™
320 CrownShield is a two-component general purpose epoxy primer, coating, and flooring mortar binder for broadcast and hand-troweled or power-troweled systems. It is a low viscosity, low odor, 100% solids thermosetting epoxy.
323 CrownShield® High-Build Pigment Epoxy
323 CrownShield is a two-component, 100% solids, epoxy base coat, and mortar binder when select trowelable mortar aggregate is incorporated. 323 CrownShield is not a topcoat. It is designed to be a tough, durable, and impact-resistant flooring product. It is a base coat and can be troweled in place.
CrownShield 315 SL
315 CrownShield is a three-component pigmented epoxy self-leveling system. It is 100% solids, epoxy binder and preengineered slurry aggregate (SP605 SL Sand) designed for resurfacing flooring product. It provides an economical resurfacing product that is designed to repair pitted and spalled concrete. 315 CrownShield is designed to be a tough, durable, abrasion and impact resistant flooring product.
CrownFlex 304
304 CrownFlex is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, that can be used as a base coat. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is used as an epoxy membrane for waterproofing and cracks dampening under epoxy coating and flooring systems.
356 CrownPro™ Novolac TempShield™ Heat Resistant
356 CrownPro is a two-component, 100% solids, heat resistant Novolac epoxy base coat, and mortar binder when select trowelable mortar aggregate is incorporated. It is designed to be a tough, durable, and impact-resistant flooring product. It is a base coat and can be troweled in place. It can be upgraded with Crown Polymers aluminum oxide for skid resistance.
CrownShield Line Striping 359
CrownShield ® Line Striping (Product No 359) is a 100% solids, non-shrink, moisture- insensitive, two-component modified high- modulus smooth epoxy coating formulated to adhere and cure on damp or dry wood, steel and concrete surfaces.
CrownSlurry 305
CrownSlurry Resin System , Product No. 305 is a three component self-leveling trowelable system. It provides an economical way to resurface, spalled and pitted concrete. Our Slurry Blend is formulated and designed to cure to a very tough and durable, dense surface for superior abrasion resistance. Support product with our Slurry Blend Product No. 305.
CrownSlurry 305 SL
305 CrownSlurry is a three-component, self-leveling, 100% solids, epoxy binder, and pre-engineered slurry aggregate (SP605 SL Sand), it is designed as a resurfacing flooring product. It is an economical resurfacing product that is designed to repair pitted and spalled concrete. 305 CrownSlurry is designed as a tough, durable, abrasion, and impact-resistant flooring product.
CrownStone TD 311
CrownStone TD, System No. 311 is a 100% Solids, 100% reactive, moisture-insensitive non shrink, 3 component, Epoxy Polymer Mortar formulated to be hand or power-troweled applied at a typical thickness of 3/16″ – 1/4″ Crown TD cures to very tough and durable, dense mortar for applications demanding a superior abrasion wear and impact resistance.
CrownClear 326
326 CrownClear is a two-component, UV Resistant, 100% solids, epoxy metallic coating, broadcast receiving, grout coat, and topcoat. It is designed as a tough, durable, and impact-resistant flooring product. It can be finish coated with UV Stable 8175 CrownPro Polyaspartic (Clear) or 8110 CrownSeal CRU Aliphatic Polyester Urethane (Clear) depending on end-use.
CrownShield 319
319 CrownShield is a two-component pigmented epoxy UV-resistant floor coating. It is a UV-resistant and low odor coating. It can be used as a pigmented neat topcoat for broadcast, slurry broadcast, and trowel mortar systems when UV resistance is desired.
CrownFlex 501
501 CrownFlex is a two-component, paste, 100% solids, semi-rigid modified paste epoxy joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy.
CrownFlex 505
505 CrownFlex is a two-component, flowable, 100% solids, semi-rigid modified epoxy joint sealant, and crack filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy.
CrownCrack Sealer 120
CrownCrack Sealer, Product No. 120 is a 100% solids, non-shrink, non-sag, moisture insensitive, 2-component modified high-modulus smooth epoxy paste adhesive formulated to adhere and cure on damp or dry surfaces.
CrownStone Cove 312 TDS
312 CrownStone is a two-component integral floor and wall cove binder. The material cures blush-free and provides an outstanding balance of physical strength and chemical resistance. It has excellent clarity for use as a cove gel with color quartz aggregate for decorative architectural floors.
Epoxy Accelerator Pack
Great to promote in cold temperature cure. Available Upon Request.
CrownPro AcidShield 7350
7350 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7350 CrownPro AcidShield is a self-priming or prime with 8320 CrownShield when the substrate is below 70°F (21°C), medium viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
CrownPro AcidShield 7500
7500 CrownPro AcidShield is a multifunctional phenol novolac resin that is extremely chemical resistant with a high heat deflection temperature. 7500 CrownPro AcidShield is a moderate viscosity thick film novolac lining designed to cure at ambient temperatures to provide superior corrosion protection for surfaces in severe chemical and physical environments.