CROWN PRODUCTS
Crown Products™
CrownMMA Sealer 8701 TDS
This is the premier MMA sealer for direct to concrete. The lower viscosity allows for quick penetration into the concrete for a strong bond and surface reconditioning.
CrownMMA Base 8702 TDS
This is the MMA mid layer/ body coat for broadcasting, slurry or self-leveling application for achieving thin to thicker coat and/or resurfacing of spalled concretes.
CrownMMA TopCoat 8703 TDS
This is the MMA high wear and chemical resistance coating. It is a very hard surface for every day all-purpose high performance topcoat.
CrownMMA ThermalTop 8704 TDS
The Flooring based on CrownMMA Flex-Base and sealed with CrownMMA ThermalTop are especially suitable as for kitchen floors and wash bays. Crown- MMA ThermalTop exhibits excellent thermal shock and high heat resistance.
CrownMMA FlexPrimer 8801 TDS
This is the premier MMA primer for hard to bond substrates such as quarry tiles and metal. Its unique urethane backbone and flexibility gives excellent bonding to countless surfaces. Not recommended direct to concrete. MUST USE CrownMMA Sealer for direct to concrete application.
CrownMMA FlexBase 8802 TDS
The CrownMMA Flex-Base is a flexible mid-layer/ body coat. This product is designed for applications that require broadcasting, slurry, or self-leveling to achieve a thin-to-thicker coat or the resurfacing of spalled concretes.
CrownMMA HyperFlex 8803 TDS
The CrownMMA Hyper-Flex yields a high level of flexibility and elongation property. The product’s high flexibility is ideal for freezers and colder applications. It is also ideal for filling in joints and cracks as well as extreme substrates movements areas.
CrownMMA FlexTop UV 8804 TDS
This MMA topcoat exhibits excellent flexibility and UV resistance. It is ideal for outdoor applications especially, pool decks and stadiums. CrownMMA Flex- Top UV is particularly advantageous in areas that are exposed to snow, rain, or extreme weather, or require to service heavy vehicular traffic, or foot traffic such as parking lots, balconies, or zoo enclosures.
CrownMMA Cove 8705 TDS
Specially designed for hanging on wall or wall coating to cove based designed or where quick-patching is required or specified.
CrownMMA Accelerator 8712 TDS
This MMA is an accelerator for COLD TEMPERATURES. It is ideal at a temperature of 40°F. CrownMMA Accelerator must be used in addition to the amount of 8706 CrownMMA BPO used at the 40°F or 30°F level. CrownMMA Accelerator – product no. 8712 must be first added into the MMA resin, mix thoroughly, then add CrownMMA BPO product no. 8706. As a rule of thumb, add about 0.5oz of CrownMMA Accelerator by volume per gallon of resin @ 39° to 32°F, increase the CrownMMA Accelerator up to 2.0 oz by volume per gallon of resin @ -20°F, increasing the quantity gradually in a consistent linear progression as the temperature decreases. Refer to the CrownMMA Flex BPO and Accelerator chart.
CrownFlex 7260 TDS
CrownFlex 7260 is a 2 component, fast setting, fast curing, solvent free, flexible, high performance, and high solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces.
CrownSeal 8105™ Hybrid Polyurethane Acrylic
8105 CrownSeal Acrylic Polyurethane Primer/Sealer is a low viscosity, two-component acrylic polyurethane designed as a primer for Polyurethanes, such as 8110 CrownSeal CRU and as a concrete sealer. It is a film-forming sealer that leaves the surface with a wet look. It is a non-yellowing UV stable sealer that is available in clear gloss and clear satin. It cures to an inert, tough, concrete sealer. The recoat window, different than all other polyurethanes, is limitless, just make sure the surface is clean and free of contaminates. It is ideal for use as an irregular surface sealer, such as cementitious knock-downs, where an acrylic sealer is unacceptable. For added durability, place a second sealer coat. Apply 8105 CrownSeal Clear between 300 to 350 sq. ft. (27.9 to 32.5 sq. m.) or 8105 CrownSeal Clear Satin between 400 to 450 sq. ft. (37.2 to 41.8 sq. m.). (Not intended for use as a primer for epoxy coating or cementitious overlayments.) It is VOC Compliant in all states and provinces in North America.
CrownSeal 8106™ Hybrid Polyurethane Acrylic
8106 CrownSeal Acrylic Polyurethane Primer/Sealer is a low viscosity, two-component acrylic polyurethane designed as a primer for Polyurethanes, such as 8111 CrownSeal CRU and as a concrete sealer. It is a film-forming sealer that leaves the surface with a wet look. It is a non-yellowing UV stable sealer that is available in clear gloss and clear satin. It cures to an inert, tough, concrete sealer. The recoat window, different than all other polyurethanes, is limitless, just make sure the surface is clean and free of contaminates. It is ideal for use as an irregular surface sealer, such as cementitious knock-downs, where an acrylic sealer is unacceptable. For added durability, place a second sealer coat. Apply 8106 CrownSeal Clear between 300 to 350 sq. ft. (27.9 to 32.5 sq. m.) or 8106 CrownSeal Clear Satin between 400 to 450 sq. ft. (37.2 to 41.8 sq. m.). (Not intended for use as a primer for epoxy coating or cementitious overlayments.) It is FED VOC Compliant.
CrownSeal 8110™ CRU
8110 CrownSeal CRU is a two-component abrasion, chemical, and stain-resistant aliphatic polyester polyurethane finish coat. It is available in clear glass, clear satin, and can be pigmented with Crown Polyurethane PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistant finish coat. It is resistant to Skydrol, betadine, and conventional hottire staining.
CrownSeal 8111™ CRU FED VOC
8111 CrownSeal CRU is a two-component abrasion, chemical, and stain-resistant aliphatic polyester polyurethane finish coat. It is available in clear glass, clear satin, and can be pigmented with Crown Polyurethane PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistant finish coat.
CrownSeal 8112™ WB
8112 CrownSeal is a two-component, low order, abrasion, and chemical resistant, UV stable, waterborne aliphatic polyurethane finish coat. It is available in clear gloss, satin, matte and it can be factory pigmented. It cures to an inert, tough, impact, abrasion, and chemical resistant finish coat. Excellent adhesion to concrete, cementitious mortars, and epoxies.
CrownCrete U 810 Skim Coat
CrownCrete U™ SC (Skim Coat) Product No. 810 is a 3-part urethane polymer concrete coating flooring product. This product is easily applied with squeegees, brushes, or rollers depending on the desired look. CrownCrete U SC is a heavy duty pigmented coating typically applied 8 to 16 mils thick depending on the design requirements. It is an all-purpose product designed to be used as a primer, mid-coat, topcoat or seal coat for pigmented broadcast systems. It can also be used for patching and coving when mixed with suitable aggregates.
CrownCrete-U 818 SL 1/8″
CrownCrete U™ 1/8” SL Product No. 818 is a 3-part urethane polymer concrete self-leveling product. It is a self-leveling slurry applied at 1/8” thick depending on design requirements. It is designed to withstand aggressive chemical attack, thermal shock resistance, or as an underlayment providing superior functional floor.
CrownCrete-U 814 SL 1/4″
CrownCrete U™ 1/4” Slurry Product No. 814 is a 3-part self-leveling, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy duty slurry cementitious urethane flooring material designed to be typically applied at ¼” thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment.
CrownCrete-U 815 Slurry
CrownCrete U™ Slurry Grade Product No. 815 is a 3-part, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy-duty slurry cementitious urethane flooring material designed to be typically applied at 1/8” to 1/4″ thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment
CrownCrete-U 838 TG
CrownCrete U™ TG (Trowel Grade) Product No. 838 is a 3-part urethane polymer concrete trowel grade product. It is a high density packed heavy duty system applied at 3/8” thick depending upon design requirements. It is formulated to withstand the aggressive environments offering excellent chemical resistance and superior thermal shock resistance with top of the line functional performances of the CrownCrete U family.
CrownCrete-U 839 Screed Grade
CrownCrete U™ Screed Product No. 839 is a 3-part, urethane polymer concrete. It is a heavy-duty rake and trowel applied or by the use of a screed box and trowel finished from a ¼” to ½” thickness. This product is part of CrownCrete U ™ family designed for aggressive environment area while offering the ease of application and quick return to services. The product can use used as a stand-alone or system design for looks and performances.
CrownCrete-U 811 Covebase
CrownCrete U™ Cove Product No. 811 is a 3-part urethane polymer concrete Cove Base product. It is designed to withstand aggressive chemical attack, thermal shock resistance, and can be used as a patching materials. CrownCrete U Cove is an integral part of the CrownCrete U flooring family of products. The vertical portion can be installed to any height at 1/16″ to 1/4″ thickness.
Crete-U Accelerator
Great to promote in cold temperature cure. Available Upon Request.
8175 CrownPro™ Polyaspartic Coating
8175 CrownPro™ is a two-component abrasion, chemical, and stain-resistant, fast-curing polyaspartic topcoat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat. It is resistant to Skydrol, betadine, and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy system. 8175 CrownPro is used as an upgraded topcoat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories, and research facilities, hospital and health care, wine and spirit processing, and other facilities subjected to heavy foot traffic, forklift traffic and chemical attack. It is VOC Compliant in all states and provinces in North America. It is available in two working times:
- 8175-F (Fast)
- 8175-S (Slow)
8190 CrownPro™ Aliphatic Polyaspartic High Solids & Low Odor Topcoat
8190 CrownPro™ is a two-component high solids and low odor during installation. It is abrasion, chemical and stain resistant, fast curing aliphatic polyaspartic finish coat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion and chemical resistance finish coat. It requires a primer, 8105 CrownSeal Acrylic Polyurethane Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. 8190 CrownPro is used as an upgraded finish coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack. It is VOC Compliant in all states and provinces in North America.
CrownPrime 7021
CrownPrime 7021 is a 2-component, high solids, liquid applied, epoxy – polyamine primer with unique penetrating characteristics. CrownPrime 7021 is ANSI/NSF 61 approved for direct contact with potable water.
7022 CrownPrime™
7022 CrownPrime is a high-performance, high build, high solids, 2-component polyamine epoxy primer. It is designed to fill the pores in the concrete substrate to avoid outgassing bubbles and to enhance adhesion. It is VOC Compliant in all states and provinces in North America.
CrownSeal 8314 SBE
CrownSeal SBE is a traditional 2-part solvent-based polyamide epoxy floor coating. It is a breathable coating that has the capability of allowing high moisture vapor to escape from the concrete. It is recommended to be applied directly to the concrete as a penetrating sealer when the concrete surface shows sign of weakness or deterioration. CrownSeal SBE cures from the bottom up preventing outgassing during topping application. SBE can be used as a standalone system on concrete with high moisture readings. SBE is formulated to reinforce the surface of weakened concrete with maximum bonding capability. CrownSeal SBE is also excellent for dust-proofing large storage warehouses.
8303 CrownShield® MVB Negative Side Moisture Vapor Barrier
8303 CrownShield® MVB can be used as a single primer coat negative side moisture vapor barrier suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion but also generates a higher propensity for sealing and blocking moisture drive than standard epoxy flooring products. It is intended for use when high moisture levels are present in the concrete which may cause loss of bond of moisture-sensitive flooring systems, including impervious and semi-pervious flooring, such as, epoxy, polyaspartic, polyurethane, carpets, vinyl tiles and covering, tile, wood floors, etc.
- 8303-F (Fast)
- 8303-S (Standard)
8320 CrownShield® Superior Chemical Resistant Thru-Product™
8320 CrownShield® is a high-performance hybrid (Bis. F and Bis. A) 2-component epoxy. Featuring outstanding abrasion and chemical resistance. It is a low viscosity, low odor, 100% solids thermosetting epoxy designed especially for challenging flooring environments, such as industrial kitchens, commercial laboratories, and wine and spirit processing facilities subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids. This is a Thru-Product™ that can be applied directly to properly prepared substrates as a primer, body coat (with/without aggregate), and topcoat.
8327 CrownShield® High Build Clear Epoxy UV Resistant
8327HD` CrownShield High Build Clear Epoxy, UV resistant, 100% solids, and low odor during cure. It is specifically formulated for use with metallic pigments, color quartz, and color flakes. When used with metallic pigments it can place at 50 mils (1.3 mm) to create “depth” or as a thin economical metallic floor at 10 mils (0.25 mm). It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
8328 CrownShield® CrownMetallic™-Epoxy Clear LV Coating
8328 CrownShield Metallic LV Epoxy Binder is a two-component, low viscosity, 100% solids, self-priming epoxy binder designed to be used with CrownMetallic Pigments SP710 from 10 to 32 mils (0.25mm to 0.81 mm) and finish coated with 8110 CrownSeal CRU or 8175 CrownPro Polyaspartic. CrownMetallic employs a decorative mineral mica (igneous, metamorphic, and sedimentary) ranging in a wide variety of naturally occurring colored crystals that are mechanically cleaved into extremely thin elastic platelets.
CrownCove 8312
CrownCove™ is a clear, 2-component, 100% solids, and thermosetting thixotropic epoxy designed specifically for vertical applications where sag resistance is desired. Formulated to be hand-trowel applied at 4” or 6” or more, such as 6” height with 1” radius cove. CrownCove ™ offers a decorative or industrial cove demanding a seamless floor to wall built system. CrownCove ™ can also be used with aggregate to be used as a patching system for concrete floors.
Epoxy Accelerator Pack
Great to promote in cold temperature cure. Available Upon Request.
8201 CrownPrime™ WB Low Viscosity Epoxy Primer & Coating
8201 CrownPrime 8201 CrownPrime is a high-performance 2-component water-borne epoxy primer and coating. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols, or unreacted amines that migrate out of competitor’s primers, leading to adhesion problems, especially when concrete moisture problems exist.
- It is the only primer formulated for use under 8303 CrownShield MVB Moisture Vapor Barrier Epoxy.
- Also, it can be used under all other Crown Polymers epoxy and polyurethane products and systems. It is VOC Compliant in all states and provinces in North America.
8202 CrownPrime™ WB Epoxy Primer and Economical Coating
8202 CrownPrime is a high-performance 2-component water-borne epoxy primer. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols, or unreacted amines that migrate out of competitor’s primers, leading to adhesion problems, especially when concrete moisture problems exist. It is the only primer formulated for use under 8303 CrownShield MVB Moisture Vapor Barrier Epoxy. Also, it can be used under all other Crown Polymers epoxy and polyurethane products and systems. It is VOC Compliant in all states and provinces in North America.
8204 CrownPrime™ WB Water Extended, Low Viscosity Epoxy Primer
8204 CrownPrime is a high-performance 3-component water-borne epoxy primer coating. It is sold as a two-component kit that is field extended with potable water. It is designed to field extended with potable water to reduce its overall viscosity to improve penetration of the concrete substrate. It may enhance bond when residual contaminates are still in properly prepared concrete, such as residual sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents.
8205 CrownPrimer™ Oil Tolerant Primer
8205 Oil Stop Primer is an epoxy, two-component, low viscosity product designed for use as a primer on concrete substrates that are contaminated with hydrocarbon oils, such as, petroleum products and their derivatives, motor oil, solvents, cutting oils, and hydraulics fluids. Also, the 8205 Oil Stop Primer is an effective primer when the concrete surface is contaminated by animal fats or vegetable oils. 8205 Oil Stop Primer possesses outstanding adhesion to contaminated concrete surfaces making it ideal for challenging oil and fat contaminated concrete surface applications. 8205 Oil Stop Primer is not intended to be used where contamination is from non-hydrocarbon lubricants and oils, such as silicone or lithium oils, pastes, greases, and compounds. It is They are VOC Compliant in all states and provinces in North America.
8355 CrownShield® Pigmented Epoxy Binder for Vinyl Chips
8355 CrownShield is a 2 component, high build, high pigmented load epoxy binder that is specially designed to receive CrownFlake System vinyl chips 1/8 inch and 1/4-inch flakes. It is self-priming and it is formulated as a moisture tolerant epoxy binder and bonds tenaciously dry or damp concrete. It can be applied directly to “saturated surface dry” (SDS) concrete slabs on grade (with no standing water).
8370 CrownTerrazzo™ Thin Set Epoxy Terrazzo
8370 CrownTerrazzo is a pigmented two-component epoxy binder that is used to create the most decorative floors in the construction industry. It is formulated to meet the physical properties of the NTMA (National Terrazzo and Mosaic Association), TTMAC (Terrazzo, Tile and Marble Association of Canada), and Crown Polymers thin-set terrazzo flooring standards. It is installed at a normal thickness of 3/8 inch (9.5 mm) but can be applied as thin as 1/4 inch (6.35 mm).
8502 CrownFlex™ Semi-Rigid Epoxy LV
8502 CrownFlex is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, and joint sealant and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for a traffic signal, electric gates, and robotics. 8 For armor joint and crack edges use 8503 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges.
8503 CrownFlex™ Thixotropic Epoxy Cove Base & Joint/Crack Filler
8503 CrownFlex is a two-component, 100% solids, semi-rigid thixotropic epoxy cove base binder, orange peel coating and a sag-resistant control joint and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. For armoring concrete joint and crack edges use 8503 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges. It is used on floors, joints, and cracks subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids.
8504 CrownFlex™ Semi-Rigid Non-Sag Paste Epoxy Joint/Crack Filler
8504 CrownFlex is a two-component, 100% solids, semi-rigid thixotropic epoxy cove base binder, orange peel coating and a sag-resistant control joint and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. For armoring concrete joint and crack edges use 8504 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges
8602 CrownPro™ ESD
8602 CrownPro StaticShield ESD Static Dissipative or Conductive Pigmented Epoxy is a three-component, high-performance epoxy floor coating system that meets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards. It is electrically active within resistance range requirements for static dissipative or conductive flooring systems, which rely upon the epoxy prime coat. It is VOC compliant in all States and Provinces in North America.
8520 CrownShield® Semi-Rigid LV Epoxy Mortar Binder
8520 CrownShield is a multi-functional, low viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type III, Grade 1, Class B, and Class C and AASHTO M235 Type III, Grade 1, Class B, and Class C. It is low viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ratio by volume. It is self-priming, meaning it can be installed directly to properly prepared Portland cement concrete. Crown Polymers offers several up-grade topcoats and finish coats if they are required. Aggregate Load:
- Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
- Self-Leveling Aggregate (Crown Polymers SP603 Slurry Sand) 3 gal mix epoxy to 1 bag aggregate.
- Liquid placed at 30 – 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried, and bagged 0.70 to .075 pounds per square foot per lift. It is VOC Compliant in all states and provinces in North America.
8521 CrownShield® Semi-Rigid MV Epoxy Mortar Binder
8521 CrownShield is a multi-functional, medium viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type III, Grade 2, Class B, and Class C and AASHTO M235 Type III, Grade 2, Class B, and Class C. It is medium viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ratio by volume. It is self-priming, meaning it can be installed directly to properly prepared Portland cement concrete. Crown Polymers offers several upgrade topcoats and finish coats if they are required. Aggregate Load:
- Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
- Self-Leveling Aggregate (Crown Polymers SP603 Slurry Sand) 3 gal mix epoxy to 1 bag aggregate.
- Liquid placed at 30 – 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried, and bagged 0.70 to .075 pounds per square foot per lift. It is VOC Compliant in all states and provinces in North America.
7350 CrownPro® AcidShield™
7350 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7350 CrownPro AcidShield is a self-priming or prime with 8320 CrownShield when the substrate is below 70°F (21°C), medium viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
7500 CrownPro® AcidShield™
7500 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7500 CrownPro AcidShield is a self-priming or prime with 8320 CrownShield when the substrate is below 70°F (21°C), medium viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
7521 CrownPro® AcidShield™
7521 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7521 CrownPro AcidShield is a self-priming, low viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
CrownSeal 8101™ WB LV Acrylic Grout and Sealer
8101 CrownSeal is a single component, waterborne, ultraviolet stable, high-performance, fast-drying acrylic emulsion. It is used as a vinyl chip as a clear grout coat, and it is used as a concrete and cementitious overlayment sealer grout coat for CrownFlake vinyl chips. Place at 200 sq. ft. (18.6 sq. m.) per gallon. A sealer can be used as a clear or pigment sealer for Concrete and Cementitious Overlays.
CrownMMA Sealer 8701 TDS
This is the premier MMA sealer for direct to concrete. The lower viscosity allows for quick penetration into the concrete for a strong bond and surface reconditioning.
8100 CrownSeal™ CRU Aliphatic Polyurethane UV Stable
8100 CrownSeal™ CRU is a high solids, two-component abrasion, chemical, and stain-resistant aliphatic polyurethane finish coat. It is available in clear glass and clear satin. It cures to an inert, tough, impact, abrasion, and chemical resistant finish coat. It is resistant to Skydrol, betadine, and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy system. It requires a primer, 8105 CrownSeal Polyurethane Hybrid Polyurethane-Acrylic Primer, and Concrete Sealer when it is applied to properly prepared concrete and cementitious overlays.
CrownCrete U 810 Skim Coat
CrownCrete U™ SC (Skim Coat) Product No. 810 is a 3-part urethane polymer concrete coating flooring product. This product is easily applied with squeegees, brushes, or rollers depending on the desired look. CrownCrete U SC is a heavy duty pigmented coating typically applied 8 to 16 mils thick depending on the design requirements. It is an all-purpose product designed to be used as a primer, mid-coat, topcoat or seal coat for pigmented broadcast systems. It can also be used for patching and coving when mixed with suitable aggregates.
CrownCrete-U 818 SL 1/8″
CrownCrete U™ 1/8” SL Product No. 818 is a 3-part urethane polymer concrete self-leveling product. It is a self-leveling slurry applied at 1/8” thick depending on design requirements. It is designed to withstand aggressive chemical attack, thermal shock resistance, or as an underlayment providing superior functional floor.
CrownCrete-U 814 SL 1/4″
CrownCrete U™ 1/4” Slurry Product No. 814 is a 3-part self-leveling, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy duty slurry cementitious urethane flooring material designed to be typically applied at ¼” thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment.
CrownCrete-U 815 Slurry
CrownCrete U™ Slurry Grade Product No. 815 is a 3-part, broadcast-applied urethane polymer concrete and slurry flooring product. It is a heavy-duty slurry cementitious urethane flooring material designed to be typically applied at 1/8” to 1/4″ thickness, or in conjunction with specific design requirements. This product is engineered to withstand aggressive chemical attacks, maintain thermal shock resistance, and act as a superior functional floor underlayment
CrownCrete-U 838 TG
CrownCrete U™ TG (Trowel Grade) Product No. 838 is a 3-part urethane polymer concrete trowel grade product. It is a high density packed heavy duty system applied at 3/8” thick depending upon design requirements. It is formulated to withstand the aggressive environments offering excellent chemical resistance and superior thermal shock resistance with top of the line functional performances of the CrownCrete U family.
CrownCrete-U 839 Screed Grade
CrownCrete U™ Screed Product No. 839 is a 3-part, urethane polymer concrete. It is a heavy-duty rake and trowel applied or by the use of a screed box and trowel finished from a ¼” to ½” thickness. This product is part of CrownCrete U ™ family designed for aggressive environment area while offering the ease of application and quick return to services. The product can use used as a stand-alone or system design for looks and performances.
CrownCrete-U 811 Covebase
CrownCrete U™ Cove Product No. 811 is a 3-part urethane polymer concrete Cove Base product. It is designed to withstand aggressive chemical attack, thermal shock resistance, and can be used as a patching materials. CrownCrete U Cove is an integral part of the CrownCrete U flooring family of products. The vertical portion can be installed to any height at 1/16″ to 1/4″ thickness.
Crete-U Accelerator
Great to promote in cold temperature cure. Available Upon Request.
8175 CrownPro™ Polyaspartic Coating
8175 CrownPro™ is a two-component abrasion, chemical, and stain-resistant, fast-curing polyaspartic topcoat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion, and chemical resistance finish coat. It is resistant to Skydrol, betadine, and conventional hot-tire staining. Excellent adhesion to Crown Polymers epoxy system. 8175 CrownPro is used as an upgraded topcoat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories, and research facilities, hospital and health care, wine and spirit processing, and other facilities subjected to heavy foot traffic, forklift traffic and chemical attack. It is VOC Compliant in all states and provinces in North America. It is available in two working times:
- 8175-F (Fast)
- 8175-S (Slow)
8190 CrownPro™ Aliphatic Polyaspartic High Solids & Low Odor Topcoat
8190 CrownPro™ is a two-component high solids and low odor during installation. It is abrasion, chemical and stain resistant, fast curing aliphatic polyaspartic finish coat. It is available in clear gloss and can be pigmented with CrownPigment™ PigmentPacks™. It cures to an inert, tough, impact, abrasion and chemical resistance finish coat. It requires a primer, 8105 CrownSeal Acrylic Polyurethane Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. 8190 CrownPro is used as an upgraded finish coat on Crown Polymers products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack. It is VOC Compliant in all states and provinces in North America.
CrownPrime 7021
CrownPrime 7021 is a 2-component, high solids, liquid applied, epoxy – polyamine primer with unique penetrating characteristics. CrownPrime 7021 is ANSI/NSF 61 approved for direct contact with potable water.
7022 CrownPrime™
7022 CrownPrime is a high-performance, high build, high solids, 2-component polyamine epoxy primer. It is designed to fill the pores in the concrete substrate to avoid outgassing bubbles and to enhance adhesion. It is VOC Compliant in all states and provinces in North America.
CrownSeal 8314 SBE
CrownSeal SBE is a traditional 2-part solvent-based polyamide epoxy floor coating. It is a breathable coating that has the capability of allowing high moisture vapor to escape from the concrete. It is recommended to be applied directly to the concrete as a penetrating sealer when the concrete surface shows sign of weakness or deterioration. CrownSeal SBE cures from the bottom up preventing outgassing during topping application. SBE can be used as a standalone system on concrete with high moisture readings. SBE is formulated to reinforce the surface of weakened concrete with maximum bonding capability. CrownSeal SBE is also excellent for dust-proofing large storage warehouses.
8303 CrownShield® MVB Negative Side Moisture Vapor Barrier
8303 CrownShield® MVB can be used as a single primer coat negative side moisture vapor barrier suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion but also generates a higher propensity for sealing and blocking moisture drive than standard epoxy flooring products. It is intended for use when high moisture levels are present in the concrete which may cause loss of bond of moisture-sensitive flooring systems, including impervious and semi-pervious flooring, such as, epoxy, polyaspartic, polyurethane, carpets, vinyl tiles and covering, tile, wood floors, etc.
- 8303-F (Fast)
- 8303-S (Standard)
8320 CrownShield® Superior Chemical Resistant Thru-Product™
8320 CrownShield® is a high-performance hybrid (Bis. F and Bis. A) 2-component epoxy. Featuring outstanding abrasion and chemical resistance. It is a low viscosity, low odor, 100% solids thermosetting epoxy designed especially for challenging flooring environments, such as industrial kitchens, commercial laboratories, and wine and spirit processing facilities subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids. This is a Thru-Product™ that can be applied directly to properly prepared substrates as a primer, body coat (with/without aggregate), and topcoat.
8327 CrownShield® High Build Clear Epoxy UV Resistant
8327HD` CrownShield High Build Clear Epoxy, UV resistant, 100% solids, and low odor during cure. It is specifically formulated for use with metallic pigments, color quartz, and color flakes. When used with metallic pigments it can place at 50 mils (1.3 mm) to create “depth” or as a thin economical metallic floor at 10 mils (0.25 mm). It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America.
8328 CrownShield® CrownMetallic™-Epoxy Clear LV Coating
8328 CrownShield Metallic LV Epoxy Binder is a two-component, low viscosity, 100% solids, self-priming epoxy binder designed to be used with CrownMetallic Pigments SP710 from 10 to 32 mils (0.25mm to 0.81 mm) and finish coated with 8110 CrownSeal CRU or 8175 CrownPro Polyaspartic. CrownMetallic employs a decorative mineral mica (igneous, metamorphic, and sedimentary) ranging in a wide variety of naturally occurring colored crystals that are mechanically cleaved into extremely thin elastic platelets.
CrownCove 8312
CrownCove™ is a clear, 2-component, 100% solids, and thermosetting thixotropic epoxy designed specifically for vertical applications where sag resistance is desired. Formulated to be hand-trowel applied at 4” or 6” or more, such as 6” height with 1” radius cove. CrownCove ™ offers a decorative or industrial cove demanding a seamless floor to wall built system. CrownCove ™ can also be used with aggregate to be used as a patching system for concrete floors.
Epoxy Accelerator Pack
Great to promote in cold temperature cure. Available Upon Request.
8201 CrownPrime™ WB Low Viscosity Epoxy Primer & Coating
8201 CrownPrime 8201 CrownPrime is a high-performance 2-component water-borne epoxy primer and coating. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols, or unreacted amines that migrate out of competitor’s primers, leading to adhesion problems, especially when concrete moisture problems exist.
- It is the only primer formulated for use under 8303 CrownShield MVB Moisture Vapor Barrier Epoxy.
- Also, it can be used under all other Crown Polymers epoxy and polyurethane products and systems. It is VOC Compliant in all states and provinces in North America.
8202 CrownPrime™ WB Epoxy Primer and Economical Coating
8202 CrownPrime is a high-performance 2-component water-borne epoxy primer. It is designed to bond to properly prepared concrete substrates that may have been contaminated by sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents. It contains no migratory plasticizers, phenols, or unreacted amines that migrate out of competitor’s primers, leading to adhesion problems, especially when concrete moisture problems exist. It is the only primer formulated for use under 8303 CrownShield MVB Moisture Vapor Barrier Epoxy. Also, it can be used under all other Crown Polymers epoxy and polyurethane products and systems. It is VOC Compliant in all states and provinces in North America.
8204 CrownPrime™ WB Water Extended, Low Viscosity Epoxy Primer
8204 CrownPrime is a high-performance 3-component water-borne epoxy primer coating. It is sold as a two-component kit that is field extended with potable water. It is designed to field extended with potable water to reduce its overall viscosity to improve penetration of the concrete substrate. It may enhance bond when residual contaminates are still in properly prepared concrete, such as residual sodium silicate, potassium silicate, or lithium silicate surface hardeners or curing agents.
8205 CrownPrimer™ Oil Tolerant Primer
8205 Oil Stop Primer is an epoxy, two-component, low viscosity product designed for use as a primer on concrete substrates that are contaminated with hydrocarbon oils, such as, petroleum products and their derivatives, motor oil, solvents, cutting oils, and hydraulics fluids. Also, the 8205 Oil Stop Primer is an effective primer when the concrete surface is contaminated by animal fats or vegetable oils. 8205 Oil Stop Primer possesses outstanding adhesion to contaminated concrete surfaces making it ideal for challenging oil and fat contaminated concrete surface applications. 8205 Oil Stop Primer is not intended to be used where contamination is from non-hydrocarbon lubricants and oils, such as silicone or lithium oils, pastes, greases, and compounds. It is They are VOC Compliant in all states and provinces in North America.
8355 CrownShield® Pigmented Epoxy Binder for Vinyl Chips
8355 CrownShield is a 2 component, high build, high pigmented load epoxy binder that is specially designed to receive CrownFlake System vinyl chips 1/8 inch and 1/4-inch flakes. It is self-priming and it is formulated as a moisture tolerant epoxy binder and bonds tenaciously dry or damp concrete. It can be applied directly to “saturated surface dry” (SDS) concrete slabs on grade (with no standing water).
8370 CrownTerrazzo™ Thin Set Epoxy Terrazzo
8370 CrownTerrazzo is a pigmented two-component epoxy binder that is used to create the most decorative floors in the construction industry. It is formulated to meet the physical properties of the NTMA (National Terrazzo and Mosaic Association), TTMAC (Terrazzo, Tile and Marble Association of Canada), and Crown Polymers thin-set terrazzo flooring standards. It is installed at a normal thickness of 3/8 inch (9.5 mm) but can be applied as thin as 1/4 inch (6.35 mm).
8502 CrownFlex™ Semi-Rigid Epoxy LV
8502 CrownFlex is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, and joint sealant and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for a traffic signal, electric gates, and robotics. 8 For armor joint and crack edges use 8503 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges.
8503 CrownFlex™ Thixotropic Epoxy Cove Base & Joint/Crack Filler
8503 CrownFlex is a two-component, 100% solids, semi-rigid thixotropic epoxy cove base binder, orange peel coating and a sag-resistant control joint and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. For armoring concrete joint and crack edges use 8503 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges. It is used on floors, joints, and cracks subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids.
8504 CrownFlex™ Semi-Rigid Non-Sag Paste Epoxy Joint/Crack Filler
8504 CrownFlex is a two-component, 100% solids, semi-rigid thixotropic epoxy cove base binder, orange peel coating and a sag-resistant control joint and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. For armoring concrete joint and crack edges use 8504 CrownFlex instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint or crack edges
8602 CrownPro™ ESD
8602 CrownPro StaticShield ESD Static Dissipative or Conductive Pigmented Epoxy is a three-component, high-performance epoxy floor coating system that meets ANSI/ESD 2020 and ANSI/ESD STM7.1 Standards. It is electrically active within resistance range requirements for static dissipative or conductive flooring systems, which rely upon the epoxy prime coat. It is VOC compliant in all States and Provinces in North America.
8520 CrownShield® Semi-Rigid LV Epoxy Mortar Binder
8520 CrownShield is a multi-functional, low viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type III, Grade 1, Class B, and Class C and AASHTO M235 Type III, Grade 1, Class B, and Class C. It is low viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ratio by volume. It is self-priming, meaning it can be installed directly to properly prepared Portland cement concrete. Crown Polymers offers several up-grade topcoats and finish coats if they are required. Aggregate Load:
- Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
- Self-Leveling Aggregate (Crown Polymers SP603 Slurry Sand) 3 gal mix epoxy to 1 bag aggregate.
- Liquid placed at 30 – 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried, and bagged 0.70 to .075 pounds per square foot per lift. It is VOC Compliant in all states and provinces in North America.
8521 CrownShield® Semi-Rigid MV Epoxy Mortar Binder
8521 CrownShield is a multi-functional, medium viscosity, semi-rigid, 100% solids, moisture tolerant 2-component epoxy mortar binder. It meets ASTM C881 Type III, Grade 2, Class B, and Class C and AASHTO M235 Type III, Grade 2, Class B, and Class C. It is medium viscosity, low odor, 100% solids thermosetting epoxy designed especially for a mortar binder. It is easy to mix, 1:1 mix ratio by volume. It is self-priming, meaning it can be installed directly to properly prepared Portland cement concrete. Crown Polymers offers several upgrade topcoats and finish coats if they are required. Aggregate Load:
- Trowel Mortar Aggregate by Volume: 6 to 7 parts tri-blend aggregate and 1 part Epoxy Mortar Binder.
- Self-Leveling Aggregate (Crown Polymers SP603 Slurry Sand) 3 gal mix epoxy to 1 bag aggregate.
- Liquid placed at 30 – 40 mils. Broadcast Aggregate Load (30 Mesh), uniform in size, washed dried, and bagged 0.70 to .075 pounds per square foot per lift. It is VOC Compliant in all states and provinces in North America.
7350 CrownPro® AcidShield™
7350 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7350 CrownPro AcidShield is a self-priming or prime with 8320 CrownShield when the substrate is below 70°F (21°C), medium viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
7500 CrownPro® AcidShield™
7500 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7500 CrownPro AcidShield is a self-priming or prime with 8320 CrownShield when the substrate is below 70°F (21°C), medium viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
7521 CrownPro® AcidShield™
7521 CrownPro AcidShield is a multifunctional phenol novolac epoxy resin that is extremely chemical resistant and has a high heat deflection temperature. 7521 CrownPro AcidShield is a self-priming, low viscosity novolac epoxy mortar binder and coating product designed to cure at ambient temperatures and to provide superior corrosion protection for surfaces subjected to severe chemical environments.
CrownSeal 8101™ WB LV Acrylic Grout and Sealer
8101 CrownSeal is a single component, waterborne, ultraviolet stable, high-performance, fast-drying acrylic emulsion. It is used as a vinyl chip as a clear grout coat, and it is used as a concrete and cementitious overlayment sealer grout coat for CrownFlake vinyl chips. Place at 200 sq. ft. (18.6 sq. m.) per gallon. A sealer can be used as a clear or pigment sealer for Concrete and Cementitious Overlays.