BAD AXE PRODUCTS MMR INSTANT MOLD & MILDEW STAIN REMOVER 2.5 Gallons x 2 (5 Gallons) MMR – Mold Stain Remover Active: A proprietary blend of EPA-registered ingredients including sodium hypochlorite and surfactants. MMR mold stain remover is the industry’s most reliable product for easily and immediately removing mold stains from building materials such as the wood found in attics and crawl spaces. It is also effective on other surfaces including, concrete, cinder block, hardiboard, vinyl siding and composite decking. No sanding, media blasting or encapsulation is required to quickly remove mold stains. MMR offers superior performance to bleach and hydrogen peroxide based products. The application of MMR reduces labor, lowering expenses and increasing profits. Coverage: MMR is a ready-to-use (RTU) product. MMR covers between 175 -250 square feet per gallon, depending on the substrate. MMR mold stain remover has quickly become the industry’s “go-to-product” for mold-related projects. MMR mold stain remover is a commercial-grade mold and mildew stain remover formulated to immediately remove mold and mildew stains present on wood, concrete, cinder block, hardiboard, vinyl siding, composite decking and other porous and semi-porous surfaces. It is a fast and easy application that eradicates mold stains on contact.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 179.98
BAD AXE PRODUCTS MMR INSTANT MOLD & MILDEW STAIN REMOVER 2.5 Gallons x 2 (5 Gallons) MMR – Mold Stain Remover Active: A proprietary blend of EPA-registered ingredients including sodium hypochlorite and surfactants. MMR mold stain remover is the industry’s most reliable product for easily and immediately removing mold stains from building materials such as the wood found in attics and crawl spaces. It is also effective on other surfaces including, concrete, cinder block, hardiboard, vinyl siding and composite decking. No sanding, media blasting or encapsulation is required to quickly remove mold stains. MMR offers superior performance to bleach and hydrogen peroxide based products. The application of MMR reduces labor, lowering expenses and increasing profits. Coverage: MMR is a ready-to-use (RTU) product. MMR covers between 175 -250 square feet per gallon, depending on the substrate. MMR mold stain remover has quickly become the industry’s “go-to-product” for mold-related projects. MMR mold stain remover is a commercial-grade mold and mildew stain remover formulated to immediately remove mold and mildew stains present on wood, concrete, cinder block, hardiboard, vinyl siding, composite decking and other porous and semi-porous surfaces. It is a fast and easy application that eradicates mold stains on contact. quantity
$ 179.98
Premera Coatings - Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 15.00
Premera Coatings - Anti-Skid (Pozzotive 55) Additive for T2 MCM & T9 VFC - Pozzotive is manufactured from post-consumer waste bottle glass. The two primary sources are from material recovery facilities (MRFs) and bottle redemption programs. Other sources include restaurant and bar collection programs, recyclable drop-off facilities, curbside glass pick-up programs, etc. MRFs are facilities that process recyclables into homogeneous recycled product streams including paper, cardboard, plastic, ferrous and non-ferrous metals and glass. The glass is typically co-mingled with non-glass materials including paper, plastic, metals and other non recyclable objects. The typical MRF glass is 80% glass and 20% other materials by dry weight. Urban Mining separates the trash and cleans the glass to very high cleanliness standards. The glass is then ground to an extremely fine powder, typically less than 45 micron in size. quantity
$ 15.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface. quantity
$ 175.00
SWISSMEX ACETONE / ALCOHOL SPRAYER 1 GALLON
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 148.00
SWISSMEX ACETONE / ALCOHOL SPRAYER 1 GALLON quantity
$ 148.00
Nukote Coating Systems - Nukote HLT-SR Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (5-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish.. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application)
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 425.00
Nukote Coating Systems - Nukote HLT-SR Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (5-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish.. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application) quantity
$ 425.00
Premera Coatings - Matting Agent - Mix the entire bag of matting agent with 1 gallon of Premera T2 MCM or Premea T9 VFC. Stir the agent into the desired product before application. Pump-spray application is recommended for a smooth and successful finish.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 8.50
Premera Coatings - Matting Agent - Mix the entire bag of matting agent with 1 gallon of Premera T2 MCM or Premea T9 VFC. Stir the agent into the desired product before application. Pump-spray application is recommended for a smooth and successful finish. quantity
$ 8.50
Premera Coatings - Crystal Guard is part of the One Day Polish system: Step 1 is a densify and polish step, and Step 2 is a Guard that protects from food and drink acids and stains and can be continuously burnished. Premera Crystal Guard is a single component, polycarbonate polymer that provides abrasion and chemical stain resistance to polished concrete created with Crystal Densifier. Premera Crystal Guard is the most stain resistant guard product on the market, providing several hours to permanent protection against coffee, vinegar, pickle juice, red wine, soda and others common stain causing agents. Crystal Guard is applied with a microfiber pad, and burnished with a 3000 grit diamond pad followed by a white buffing pad. The Premera One Day Polish System significantly reduces time to polish concrete, while also providing high chemical and abrasion resistance to concrete.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 120.00
Premera Coatings - Crystal Guard is part of the One Day Polish system: Step 1 is a densify and polish step, and Step 2 is a Guard that protects from food and drink acids and stains and can be continuously burnished. Premera Crystal Guard is a single component, polycarbonate polymer that provides abrasion and chemical stain resistance to polished concrete created with Crystal Densifier. Premera Crystal Guard is the most stain resistant guard product on the market, providing several hours to permanent protection against coffee, vinegar, pickle juice, red wine, soda and others common stain causing agents. Crystal Guard is applied with a microfiber pad, and burnished with a 3000 grit diamond pad followed by a white buffing pad. The Premera One Day Polish System significantly reduces time to polish concrete, while also providing high chemical and abrasion resistance to concrete. quantity
$ 120.00
Continue Shopping