Nukote Coating Systems – Premera Vinyl Floor T9 Coat – (Gloss-5-Gallon) for Vinyl Floors creates a thin and durable layer of quartz to protect vinyl, linoleum and vinyl composition tiles. The Premera Vinyl Floor Coat T9 is a clear quartz layer that removes the need to keep stripping and waxing these types of floors, significantly lowering maintenance costs. (Gloss-5-Gallon of Premera Vinyl Floor Coat T9 calculation for theoretical coverage: 2,500 – 4,000 ft2/5gal @ Recommended spread rate of wet mils 2.0 -3.0, Coverage will vary depending on applicator, the porosity and texture of the substrate.) Once you apply Premera Vinyl Floor Coat to a clean, oil free, and dry Vinyl Surface, it’s Durable, Wear resistant, Scratch resistant, Solvent based, Non-breathable, It prevents Scuffs, Acid Etching, and Food and Beverage Stains. Premera Vinyl Floor Coat Can be applied on Vinyl floor products, Linoleum, and Vinyl Composition Tile.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 825.00
Nukote Coating Systems – Premera Vinyl Floor T9 Coat – (Gloss-5-Gallon) for Vinyl Floors creates a thin and durable layer of quartz to protect vinyl, linoleum and vinyl composition tiles. The Premera Vinyl Floor Coat T9 is a clear quartz layer that removes the need to keep stripping and waxing these types of floors, significantly lowering maintenance costs. (Gloss-5-Gallon of Premera Vinyl Floor Coat T9 calculation for theoretical coverage: 2,500 – 4,000 ft2/5gal @ Recommended spread rate of wet mils 2.0 -3.0, Coverage will vary depending on applicator, the porosity and texture of the substrate.) Once you apply Premera Vinyl Floor Coat to a clean, oil free, and dry Vinyl Surface, it’s Durable, Wear resistant, Scratch resistant, Solvent based, Non-breathable, It prevents Scuffs, Acid Etching, and Food and Beverage Stains. Premera Vinyl Floor Coat Can be applied on Vinyl floor products, Linoleum, and Vinyl Composition Tile. quantity
$ 825.00
World's Best Graffiti Removal System - World's Best Detergent (5-Gallon) A highly effective detergent concentrate intended for paving and hard surface cleaning. Designed to tackle the hardest grease, grunge, and grime stains such as vegetable and oil stains around trash enclosures, tire skid marks, gum ghosts, and other marks from asphalt, concrete, stone, or tile floors.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 220.00
World's Best Graffiti Removal System - World's Best Detergent (5-Gallon) A highly effective detergent concentrate intended for paving and hard surface cleaning. Designed to tackle the hardest grease, grunge, and grime stains such as vegetable and oil stains around trash enclosures, tire skid marks, gum ghosts, and other marks from asphalt, concrete, stone, or tile floors. quantity
$ 220.00
World's Best Graffiti Removal System - Bare Brick, Stone & Masonry Graffiti Remover (1 Quart) Bare Brick, Stone & Masonry Graffiti Remover (BBSM) is a highly effective, economical, and biodegradable remover for all types of spray can paints, oil/ latex/ water-based paint over spray, paint spill stains, grease, grime, smoke, and oil stains, as well as other marks on porous brick, stone and concrete surfaces including cinder block, split face block, and exposed aggregate.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 25.50
World's Best Graffiti Removal System - Bare Brick, Stone & Masonry Graffiti Remover (1 Quart) Bare Brick, Stone & Masonry Graffiti Remover (BBSM) is a highly effective, economical, and biodegradable remover for all types of spray can paints, oil/ latex/ water-based paint over spray, paint spill stains, grease, grime, smoke, and oil stains, as well as other marks on porous brick, stone and concrete surfaces including cinder block, split face block, and exposed aggregate. quantity
$ 25.50
Nukote Coating Systems - Nukote HLT-SR Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (5-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish.. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application)
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 425.00
Nukote Coating Systems - Nukote HLT-SR Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (5-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish.. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application) quantity
$ 425.00
World's Best Graffiti Removal System - Sensitive Surface Graffiti Remover (20oz Spray Can) Sensitive Surface Graffiti Remover (SSGR) has been designed as a ‘brush on, wipe off type product for the removal of graffiti, grease, and grime from painted and other sensitive surfaces without damage. It is designed to remove spray can paint, felt pen and wax crayon markers, water and oil-based staining pens, over-spray, grease, tree sap, grime, and scuff marks from painted and coated surfaces such as painted walls, powder coat, stainless steel, aluminum, vinyl fences, signage, clear acrylic, plastics, windows, playground equipment and many more.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 22.00
World's Best Graffiti Removal System - Sensitive Surface Graffiti Remover (20oz Spray Can) Sensitive Surface Graffiti Remover (SSGR) has been designed as a ‘brush on, wipe off type product for the removal of graffiti, grease, and grime from painted and other sensitive surfaces without damage. It is designed to remove spray can paint, felt pen and wax crayon markers, water and oil-based staining pens, over-spray, grease, tree sap, grime, and scuff marks from painted and coated surfaces such as painted walls, powder coat, stainless steel, aluminum, vinyl fences, signage, clear acrylic, plastics, windows, playground equipment and many more. quantity
$ 22.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface. quantity
$ 175.00
Worlds Best Graffiti Removal System - Powder Free Latex Gloves - Product Description We love using these gloves! Made from 8 mm thick powder-free latex. They fit either hand and are extra long for added protection. Sold in size XL only. Box of 50 Gloves: 1 Box of 50 Gloves, Available in master cases of 10 boxes (500 gloves)
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 16.50
Worlds Best Graffiti Removal System - Powder Free Latex Gloves - Product Description We love using these gloves! Made from 8 mm thick powder-free latex. They fit either hand and are extra long for added protection. Sold in size XL only. Box of 50 Gloves: 1 Box of 50 Gloves, Available in master cases of 10 boxes (500 gloves) quantity
$ 16.50
Nukote Coating Systems - Premera Anti-Microbial Agent - Premera T2 MCM or Premera T9 VFC with ANTI-MICROBIAL AGENT - (1:1 Mix Ratio with 1 Gallon) -is the first of its kind to incorporate Silver into an inorganic Sol-Gel coating to aid in the cleanliness against odor-causing bacteria and mold on virtually any surface. Silver is a natural antimicrobial in use for thousands of years. Nukote Coating Systems - Premera T2 MCM or Premera T9VFC with ANTI-MICROBIAL AGENT maximizes the efficiency of silver by encapsulating the silver in the coating to protect them and keep them at the surface of the treated area where it can be most effective. MRSA (Staph) 99.4% Reduction In 4 Hours Norovirus* 92.5% Reduction In 4 Hours Ecoli 99.9% Reduction In 4 Hours Salmonella 99.9% Reduction In 4 Hours Bacterial Surface Degradation that works 24/7 Inhibit Mold, Mildew, and Fungal Growth Prevent Stains caused by Mold Destroy Foul and Offensive Odors *Approved Surogate Tested: Feline Calici Virus
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 100.00
Nukote Coating Systems - Premera Anti-Microbial Agent - Premera T2 MCM or Premera T9 VFC with ANTI-MICROBIAL AGENT - (1:1 Mix Ratio with 1 Gallon) -is the first of its kind to incorporate Silver into an inorganic Sol-Gel coating to aid in the cleanliness against odor-causing bacteria and mold on virtually any surface. Silver is a natural antimicrobial in use for thousands of years. Nukote Coating Systems - Premera T2 MCM or Premera T9VFC with ANTI-MICROBIAL AGENT maximizes the efficiency of silver by encapsulating the silver in the coating to protect them and keep them at the surface of the treated area where it can be most effective. MRSA (Staph) 99.4% Reduction In 4 Hours Norovirus* 92.5% Reduction In 4 Hours Ecoli 99.9% Reduction In 4 Hours Salmonella 99.9% Reduction In 4 Hours Bacterial Surface Degradation that works 24/7 Inhibit Mold, Mildew, and Fungal Growth Prevent Stains caused by Mold Destroy Foul and Offensive Odors *Approved Surogate Tested: Feline Calici Virus quantity
$ 100.00
World's Best Graffiti Removal System - Vanish Graffiti & Paint Remover (1 Quart) Vanish Paint and Graffiti Remover is a highly effective, economical, and biodegradable remover for bare brick, stone, and masonry applications. Vanish will remove all types of paints from porous stone and concrete surfaces including cinderblock, split face block, and exposed aggregate. Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment. Uses include the removal of thicker acrylic paints, paint spills, and larger tags sprayed up with a fire extinguisher or super soaker. Also recommended for the removal of unwanted, old, or vandalized murals. Alternative uses include removal of adhesive from carpet and tile floors and the removal of sealants and graffiti coatings which have deteriorated with age.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 27.50
World's Best Graffiti Removal System - Vanish Graffiti & Paint Remover (1 Quart) Vanish Paint and Graffiti Remover is a highly effective, economical, and biodegradable remover for bare brick, stone, and masonry applications. Vanish will remove all types of paints from porous stone and concrete surfaces including cinderblock, split face block, and exposed aggregate. Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment. Uses include the removal of thicker acrylic paints, paint spills, and larger tags sprayed up with a fire extinguisher or super soaker. Also recommended for the removal of unwanted, old, or vandalized murals. Alternative uses include removal of adhesive from carpet and tile floors and the removal of sealants and graffiti coatings which have deteriorated with age. quantity
$ 27.50
Nukote Coating Systems – Premera FP1 Fusion Primer for Concrete – (5-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (5-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 1,500 – 2,000 ft for 5/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 875.00
Nukote Coating Systems – Premera FP1 Fusion Primer for Concrete – (5-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (5-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 1,500 – 2,000 ft for 5/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC. quantity
$ 875.00
Continue Shopping