Weight | 40 lbs |
---|---|
Dimensions | 11.78 × 11.78 × 13.38 in |
Nukote Coating Systems – Premera FP1 Fusion Primer for Concrete – (5-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (5-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 1,500 – 2,000 ft for 5/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC.
$875.00
INDUSTRIAL SURFACE SOLUTIONS
UPS: This item is hazardous, additional shipping charges may apply
Premera FP1 Fusion Primer for Concrete is a very fast-drying and thin sol-gel-based fusion primer that functions as an inter-coat adhesion primer or direct-to-substrate primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing the substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete substrates, as long as the concrete is clean and free of bond breakers such as oils, greases, etc., no surface profile is needed to achieve a strong chemical bond to the surface.
DOCUMENTS
Comparison of Adhesion on Neoprene
and Basalt sheets
For Questions, please email or call us direct at 1-866-946-3878
10000 in stock
Sold By: INDUSTRIAL SURFACE SOLUTIONS ®