Weight | 40 lbs |
---|---|
Dimensions | 11.78 × 11.78 × 13.38 in |
Nukote Coating Systems – Nukote HLT-SR Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (5-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish.. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials – including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes – including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application)
$425.00
INDUSTRIAL SURFACE SOLUTIONS
Nukote HLT-SR is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithiumcolloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials – including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes – including structures under hydrostatic pressure. Nukote HLTSR may be used as a standalone surface treatment in certain applications.
DOCUMENTS
For Questions, please email or call us direct at 1-866-946-3878
9993 in stock (can be backordered)
Sold By: INDUSTRIAL SURFACE SOLUTIONS ®