Premera HLT Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithiumcolloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Premera’s unique advanced polymer coatings. When applied to concrete or any pozzolanic material, Premera HLT penetrates to seal, densify and thereby harden cementitious surfaces. Premera HLT is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Premera HLT also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Premera HLT last longer, cost less to maintain, and resist wear, abrasion and dusting. Premera HLT is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Premera HLT may be used as a standalone surface treatment in certain applications.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 425.00
Premera HLT Hydro Lock Treatment (5-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithiumcolloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Premera’s unique advanced polymer coatings. When applied to concrete or any pozzolanic material, Premera HLT penetrates to seal, densify and thereby harden cementitious surfaces. Premera HLT is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials - including concrete. Premera HLT also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Premera HLT last longer, cost less to maintain, and resist wear, abrasion and dusting. Premera HLT is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes - including structures under hydrostatic pressure. Premera HLT may be used as a standalone surface treatment in certain applications. quantity
$ 425.00
Premera Coatings - Anti-Microbial Agent - Premera T2 MCM or Premera T9 VFC with ANTI-MICROBIAL AGENT - (1:1 Mix Ratio with 1 Gallon) -is the first of its kind to incorporate Silver into an inorganic Sol-Gel coating to aid in the cleanliness against odor-causing bacteria and mold on virtually any surface. Silver is a natural antimicrobial in use for thousands of years. Premera T2 MCM or Premera T9VFC with ANTI-MICROBIAL AGENT maximizes the efficiency of silver by encapsulating the silver in the coating to protect them and keep them at the surface of the treated area where it can be most effective. MRSA (Staph) 99.4% Reduction In 4 Hours Norovirus* 92.5% Reduction In 4 Hours Ecoli 99.9% Reduction In 4 Hours Salmonella 99.9% Reduction In 4 Hours Bacterial Surface Degradation that works 24/7 Inhibit Mold, Mildew, and Fungal Growth Prevent Stains caused by Mold Destroy Foul and Offensive Odors *Approved Surogate Tested: Feline Calici Virus
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 100.00
Premera Coatings - Anti-Microbial Agent - Premera T2 MCM or Premera T9 VFC with ANTI-MICROBIAL AGENT - (1:1 Mix Ratio with 1 Gallon) -is the first of its kind to incorporate Silver into an inorganic Sol-Gel coating to aid in the cleanliness against odor-causing bacteria and mold on virtually any surface. Silver is a natural antimicrobial in use for thousands of years. Premera T2 MCM or Premera T9VFC with ANTI-MICROBIAL AGENT maximizes the efficiency of silver by encapsulating the silver in the coating to protect them and keep them at the surface of the treated area where it can be most effective. MRSA (Staph) 99.4% Reduction In 4 Hours Norovirus* 92.5% Reduction In 4 Hours Ecoli 99.9% Reduction In 4 Hours Salmonella 99.9% Reduction In 4 Hours Bacterial Surface Degradation that works 24/7 Inhibit Mold, Mildew, and Fungal Growth Prevent Stains caused by Mold Destroy Foul and Offensive Odors *Approved Surogate Tested: Feline Calici Virus quantity
$ 100.00
Greener Blast Technologies - GBT 007 Compact - Greener Blast Technologies Wet Abrasive Blasting Machines - Greener Blast GBT 007 CompactDimensions: 28"L x 20"W x 52"T Tare Weight: 357lbsGross Weight: 574 lbs Blast Pot Capacity: 0.7 cubic ft abrasive Water Tank Capacity: 20 Gallons Compressed Air Requirements: Minimum 185 cfm Package Includes: 007 Compact Kennametal's #5 XL Performance Nozzle 50' 3/4’’ Light Weight Blast Hose (2 Ply)50' Trigger Line Schmidt Pneumatic Deadman Control 1 Year Warranty Benefits• Hot dip galvanized & powder coated for maximum lifespan/durability• Media consumption: 50-150 lbs Per Hour• Minimal dust • Minimal containment needed• Versatility of jobs• Ability to handle numerous blast materials• Portability• Unmatched 24/7 customer support• Ease of use utilizing one bag of abrasive• Made in the USA
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 14,500.00
Greener Blast Technologies - GBT 007 Compact - Greener Blast Technologies Wet Abrasive Blasting Machines - Greener Blast GBT 007 CompactDimensions: 28"L x 20"W x 52"T Tare Weight: 357lbsGross Weight: 574 lbs Blast Pot Capacity: 0.7 cubic ft abrasive Water Tank Capacity: 20 Gallons Compressed Air Requirements: Minimum 185 cfm Package Includes: 007 Compact Kennametal's #5 XL Performance Nozzle 50' 3/4’’ Light Weight Blast Hose (2 Ply)50' Trigger Line Schmidt Pneumatic Deadman Control 1 Year Warranty Benefits• Hot dip galvanized & powder coated for maximum lifespan/durability• Media consumption: 50-150 lbs Per Hour• Minimal dust • Minimal containment needed• Versatility of jobs• Ability to handle numerous blast materials• Portability• Unmatched 24/7 customer support• Ease of use utilizing one bag of abrasive• Made in the USA quantity
$ 14,500.00
Nukote Coating Systems – Premera FP1 Fusion Primer for Concrete – (50-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (50-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 15,000 – 20,000 ft for 50 gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 8,750.00
Nukote Coating Systems – Premera FP1 Fusion Primer for Concrete – (50-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (50-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 15,000 – 20,000 ft for 50 gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC. quantity
$ 8,750.00
BAD AXE PRODUCTS ONSLAUGHT DISINFECTANT 1 Gallon (Yields 64 Gallons) ALERT. As of 3/3/2020 Bad Axe ONSLAUGHT was added to EPA List N: Disinfectants for the use against SARS-CoV-2. ONSLAUGHT shows efficacy against Human Coronavirus. ONSLAUGHT falls under the EPA registration number 61178, and is sub-registered with the EPA as 61178-1-88903. https://www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2 All ONSLAUGHT products are concentrate. ONSLAUGHT is an EPA registered disinfectant ideally suited for mold remediation and water restoration projects. ONSLAUGHT’s quaternary ammonium chloride formulation also functions as a fungicide, virucide, bacteriocide, cleaner and sanitizer. ONSLAUGHT offers a broad spectrum of kill claims for nearly 140 commonly occurring pathogens making it ideal for disinfecting surfaces in hospitals, public transportation, schools, households, and public- and private structures. ONSLAUGHT is registered for both porous and non porous surfaces. CONCENTRATE FORMULA.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 45.99
BAD AXE PRODUCTS ONSLAUGHT DISINFECTANT 1 Gallon (Yields 64 Gallons) ALERT. As of 3/3/2020 Bad Axe ONSLAUGHT was added to EPA List N: Disinfectants for the use against SARS-CoV-2. ONSLAUGHT shows efficacy against Human Coronavirus. ONSLAUGHT falls under the EPA registration number 61178, and is sub-registered with the EPA as 61178-1-88903. https://www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2 All ONSLAUGHT products are concentrate. ONSLAUGHT is an EPA registered disinfectant ideally suited for mold remediation and water restoration projects. ONSLAUGHT’s quaternary ammonium chloride formulation also functions as a fungicide, virucide, bacteriocide, cleaner and sanitizer. ONSLAUGHT offers a broad spectrum of kill claims for nearly 140 commonly occurring pathogens making it ideal for disinfecting surfaces in hospitals, public transportation, schools, households, and public- and private structures. ONSLAUGHT is registered for both porous and non porous surfaces. CONCENTRATE FORMULA. quantity
$ 45.99
Premera Coatings - Quick Seal is a single-component, spray-down, fast-drying acrylic sealer designed to seal substrate pores and capillaries before applying Premera T2 MCM. Sealing new or ground concrete with Quick Seal will double or triple the coverage of Premera T2 MCM. To use Quick Seal as a fast stain and seal, 1-2 oz of Ameripolish Acetone Based Surelock Dye can be added to 1 gallon of Quick Seal. Top coat Premera Quick Seal with Premera T2 MCM for high-performance chemical and abrasion-resistant floors.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 75.00
Premera Coatings - Quick Seal is a single-component, spray-down, fast-drying acrylic sealer designed to seal substrate pores and capillaries before applying Premera T2 MCM. Sealing new or ground concrete with Quick Seal will double or triple the coverage of Premera T2 MCM. To use Quick Seal as a fast stain and seal, 1-2 oz of Ameripolish Acetone Based Surelock Dye can be added to 1 gallon of Quick Seal. Top coat Premera Quick Seal with Premera T2 MCM for high-performance chemical and abrasion-resistant floors. quantity
$ 75.00
Nukote Coating Systems – Premera QUICK SEAL AT1 (5-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 750-3,000 ft2/5gal – Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 375.00
Nukote Coating Systems – Premera QUICK SEAL AT1 (5-Gallon) Is a Clear 2 Minute Full-Cure Sealer. You can mix solvent based dyes directly into Premera Quick Seal and Stain & Seal in one process, or apply as a Pre-Seal For Premera T2 MCM. 750-3,000 ft2/5gal – Coverage will vary depending on the porosity and texture of the substrate and applicator, please review instructions for more specific details. Stain and water repellant, very fast drying, Breathable, can be used on most Natural and Artificial Stone, Concrete, and Masonry Products, Penetrate the surface of the substrate, Enhances, and deepens natural colors of substrate, Repel moisture, stains, and mold from within the substrate. Long-lasting, easy to clean, Reduced maintenance costs, Protects most Natural and Artificial Stone, Concrete, and Masonry Products against moisture, stains, dirt, mold. Premera Quick Seal Is a Clear 2 Minute Full-Cure Sealer, Instant Hydrophobic Effect, Add Dye for Fast, Single-Step Stain and Seal. quantity
$ 375.00
SWISSMEX - TeeJet CONEJET RED CERAMIC SPRAY TIP #6
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 8.00
SWISSMEX - TeeJet CONEJET RED CERAMIC SPRAY TIP #6 quantity
$ 8.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface. quantity
$ 175.00
Continue Shopping