Nukote Coating Systems – Nukote HLT-SR Hydro Lock Treatment (50-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (50-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials – including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes – including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application)
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 4,250.00
Nukote Coating Systems – Nukote HLT-SR Hydro Lock Treatment (50-Gallon) is a unique surface treatment for concrete consisting of specialized reactive chemicals, lithium colloidal silica matrix, and a super duty siliconate water repellant. HLT-SR can be used as a concrete surface treatment to reduce micro porosity in cementitious materials or as a complementary pre-primer treatment for Nukote’s unique advanced polymer coatings. (50-Gallon) Recommended application rate on typical concrete is 150 ft2 /gal to 200 ft2 /gal (4 m2 /l to 5 m2 /l) for broom finish or 200 ft2 /gal to 250 ft2 /gal (5 m2 /l to 6 m2 /l) for burnished finish. When applied to concrete or any pozzolanic material, Nukote HLT-SR penetrates to seal, densify, and thereby harden cementitious surfaces. Nukote HLT-SR is formulated to penetrate and block capillaries, voids, and fine shrinkage cracks by reacting with free calcium hydrates to form an insoluble, permanent barrier. It improves water resistance, water repellency, and surface properties of cementitious materials – including concrete. Nukote HLT-SR also reduces the risk of coating failures associated with moisture migration and outgassing. Concrete surfaces treated with Nukote HLT-SR last longer, cost less to maintain, and resist wear, abrasion, and dusting. Nukote HLT-SR is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes – including structures under hydrostatic pressure. Nukote HLT-SR may be used as a standalone surface treatment in certain applications. Environmentally friendly with zero VOC. Reduces the porosity and increases durability of the concrete surface. Densifies and hardens new and old concrete. Improves chemical resistance and reduces water absorption. Improves resistance to staining and dusting. Improves concrete quality, durability, liquid repellency. Effective chloride and electrolyte barrier. Re-alkalizes carbonated concrete. Reduces risk of moisture out-gassing, pin-holing, and blisters in polyurea, polyurethane elastomers, or other topcoats. Nukote HLT-SR may be applied at any rate dependent on ambient temperature, surface porosity, and absorption rate of liquids into the concrete. As a densifier on floors subject to medium or heavy traffic. As a water resistant surface treatment for concrete and masonry. As a sealer for micro leaks in walls and basements. As a moisture barrier to protect different types of flooring and floor coverings. As a concrete densifier and hardener. As part of liquid and gas barrier used in containment applications with concrete structures. As part of a rehabilitation plan for deteriorated and contaminated concrete, Waterproofing wet, damp or below grade concrete (Contact Us for specific application instructions for this application) quantity
$ 4,250.00
Premera Coatings - T9 VFC is a single-component, spray-down, sol-gel-based clear liquid quartz coating that creates a thin and durable layer of quartz to protect vinyl, linoleum, and vinyl composition tiles. Premera T9 VFC provides excellent abrasion and chemical resistance while protecting the glossy appearance of VCT or vinyl floors. Comes in gloss, satin, or matte if desired. The clear quartz layer removes the need to keep stripping and waxing these types of floors, significantly lowering maintenance costs.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 165.00
Premera Coatings - T9 VFC is a single-component, spray-down, sol-gel-based clear liquid quartz coating that creates a thin and durable layer of quartz to protect vinyl, linoleum, and vinyl composition tiles. Premera T9 VFC provides excellent abrasion and chemical resistance while protecting the glossy appearance of VCT or vinyl floors. Comes in gloss, satin, or matte if desired. The clear quartz layer removes the need to keep stripping and waxing these types of floors, significantly lowering maintenance costs. quantity
$ 165.00
Premera Coatings - Crystal Densifier: Premera Crystal Densifier is part of the One Day Polish system: Step 1 is a densify and polish step; Step 2 is a Guard that protects from food and drink acids / stains and can be continuously burnished. Premera Crystal Densifier is applied directly to 100 transitional profile concrete, and then burnished with up to a 3000 grit diamond pad one hour after application. Crystal Densifier is a single component, spray down, sol-gel based quartz polymer that both densifies concrete and chemically fuses a polishable, crystal clear, quartz-mineral barrier layer into and on top of concrete. The Premera One Day Polish System significantly reduces time to polish concrete, while also providing high chemical and abrasion resistance to concrete. Using the Premera One Day Polish System, 1 crew of 2 people with 1 burnisher can polish approximately 2000 square feet of 100 transitional profile concrete to 3000 grit per hour.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 150.00
Premera Coatings - Crystal Densifier: Premera Crystal Densifier is part of the One Day Polish system: Step 1 is a densify and polish step; Step 2 is a Guard that protects from food and drink acids / stains and can be continuously burnished. Premera Crystal Densifier is applied directly to 100 transitional profile concrete, and then burnished with up to a 3000 grit diamond pad one hour after application. Crystal Densifier is a single component, spray down, sol-gel based quartz polymer that both densifies concrete and chemically fuses a polishable, crystal clear, quartz-mineral barrier layer into and on top of concrete. The Premera One Day Polish System significantly reduces time to polish concrete, while also providing high chemical and abrasion resistance to concrete. Using the Premera One Day Polish System, 1 crew of 2 people with 1 burnisher can polish approximately 2000 square feet of 100 transitional profile concrete to 3000 grit per hour. quantity
$ 150.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Premera Coatings - FP1 Fusion Primer is a single component, spray on sol-gel based fusion primer that functions as a direct to substrate primer and as an intercoat adhesion primer. FP1 Fusion Primer creates a molecular bridge between a coating and the substrate, chemically fusing substrate and top coat. FP1 is very compatible with many surfaces, and many coatings, though water-based coatings are not compatible as top coats. When used on concrete, tile or existing coatings, as long as surface is clean and free of bond breakers such as oils, greases, etc., no grinding or surface profile is needed to achieve strong chemical bond to surface. quantity
$ 175.00
Premera Coatings - Quick Seal is a single-component, spray-down, fast-drying acrylic sealer designed to seal substrate pores and capillaries before applying Premera T2 MCM. Sealing new or ground concrete with Quick Seal will double or triple the coverage of Premera T2 MCM. To use Quick Seal as a fast stain and seal, 1-2 oz of Ameripolish Acetone Based Surelock Dye can be added to 1 gallon of Quick Seal. Top coat Premera Quick Seal with Premera T2 MCM for high-performance chemical and abrasion-resistant floors.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 75.00
Premera Coatings - Quick Seal is a single-component, spray-down, fast-drying acrylic sealer designed to seal substrate pores and capillaries before applying Premera T2 MCM. Sealing new or ground concrete with Quick Seal will double or triple the coverage of Premera T2 MCM. To use Quick Seal as a fast stain and seal, 1-2 oz of Ameripolish Acetone Based Surelock Dye can be added to 1 gallon of Quick Seal. Top coat Premera Quick Seal with Premera T2 MCM for high-performance chemical and abrasion-resistant floors. quantity
$ 75.00
Continue Shopping