Nukote Coating Systems – Premera T2 MCM (Gloss-50-Gallon) Is a Sol-Gel Based Clear Top Coat. (Gloss-50-Gallon Calculation for theoretical coverage: 32,000 – 40,000 ft2/50gal on Metal, 20,000 – 30,000 ft2/50gal on Concrete @ Recommended spread rate 2 – 2.5 mils Wet, 0.7 – 0.75 mils Dry) Premera T2 MCM Can be applied on Ferrous metals including: Iron, steel, stainless steel, galvanized steel; Non-Ferrous metals including aluminum, copper, and bronze (raw, powder coated, painted or primed). Premera T2 MCM is the Ultimate Topcoat for Concrete Floors, structures, walls, masonry pavers, unglazed tile, bricks cement block, concrete that has painted, has epoxy or solvent based coatings, or applied to bare concrete that is sealed concrete with Nukote Premera Quick Seal for The Ultimate Topcoat Protection System.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 8,250.00
Nukote Coating Systems – Premera T2 MCM (Gloss-50-Gallon) Is a Sol-Gel Based Clear Top Coat. (Gloss-50-Gallon Calculation for theoretical coverage: 32,000 – 40,000 ft2/50gal on Metal, 20,000 – 30,000 ft2/50gal on Concrete @ Recommended spread rate 2 – 2.5 mils Wet, 0.7 – 0.75 mils Dry) Premera T2 MCM Can be applied on Ferrous metals including: Iron, steel, stainless steel, galvanized steel; Non-Ferrous metals including aluminum, copper, and bronze (raw, powder coated, painted or primed). Premera T2 MCM is the Ultimate Topcoat for Concrete Floors, structures, walls, masonry pavers, unglazed tile, bricks cement block, concrete that has painted, has epoxy or solvent based coatings, or applied to bare concrete that is sealed concrete with Nukote Premera Quick Seal for The Ultimate Topcoat Protection System. quantity
$ 16,500.00
Nukote Coating Systems - Premera FP1 Fusion Primer for Concrete - (1-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (1-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 300 – 400 ft2/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 175.00
Nukote Coating Systems - Premera FP1 Fusion Primer for Concrete - (1-Gallon) Solves Solvent Based Coatings and Epoxy Lifting Problems (1-Gallon of Premera FP1 Fusion Primer calculation for theoretical coverage: 300 – 400 ft2/gal @ Recommended spread rate 4 – 5 mils Wet, 0.4 – 0.9 mils Dry) No Concrete Profiling Is Required. Once you apply Premera FP1 Fusion Primer to a clean, oil free, and dry Concrete Surface, you can immediately start rolling out Epoxy, you have a 90 Minute Window, this Product Dries Quickly. Nukote FP1 Fusion Primer is compatible with solvent based epoxy and most solvent based surface coatings, it is not compatible with water-based epoxy or surface coatings. Profiling Concrete Methods are not as effective as Premera FP1 Fusion Primer, 1251 PSI test results off of PVC. quantity
$ 175.00
World's Best Graffiti Removal System - Heritage Graffiti Remover - (1 Quart) Heritage Graffiti Remover is specifically designed for sensitive, historic and important buildings, to remove graffiti from stonework, brickwork, and masonry without damage. This product is effective first time, every time, and requires very low pressure to remove softened graffiti from the surface. Importantly, Heritage Graffiti Remover will rinse very easily to avoid the presence of insoluble salts being left on the masonry. Remove all types of spray can paint from porous stone and concrete surfaces, including cinderblock, split face block and exposed aggregate. Safe and effective to use on all types of natural stone (such as limestone, granite, marble, and terrazzo). Also highly effective on some painted and coated surfaces such as signs as well as stainless steel, trees, and most plastics.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 27.50
World's Best Graffiti Removal System - Heritage Graffiti Remover - (1 Quart) Heritage Graffiti Remover is specifically designed for sensitive, historic and important buildings, to remove graffiti from stonework, brickwork, and masonry without damage. This product is effective first time, every time, and requires very low pressure to remove softened graffiti from the surface. Importantly, Heritage Graffiti Remover will rinse very easily to avoid the presence of insoluble salts being left on the masonry. Remove all types of spray can paint from porous stone and concrete surfaces, including cinderblock, split face block and exposed aggregate. Safe and effective to use on all types of natural stone (such as limestone, granite, marble, and terrazzo). Also highly effective on some painted and coated surfaces such as signs as well as stainless steel, trees, and most plastics. quantity
$ 27.50
Nukote Coating Systems - Premera T2 MCM - (Gloss-1-Gallon) Is a Sol-Gel Based Clear Top Coat. (Gloss-1-Gallon Calculation for theoretical coverage: 640 – 800 ft2/gal on Metal, 400 – 600 ft2/gal on Concrete @ Recommended spread rate 2 – 2.5 mils Wet, 0.7 – 0.75 mils Dry) Premera T2 MCM Can be applied on Ferrous metals including: Iron, steel, stainless steel, galvanized steel; Non-Ferrous metals including aluminum, copper, and bronze (raw, powder coated, painted or primed). Premera T2 MCM is the Ultimate Topcoat for Concrete Floors, structures, walls, masonry pavers, unglazed tile, bricks cement block, concrete that has painted, has epoxy or solvent based coatings, or applied to bare concrete that is sealed concrete with Nukote Premera Quick Seal for The Ultimate Topcoat Protection System.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 165.00
Nukote Coating Systems - Premera T2 MCM - (Gloss-1-Gallon) Is a Sol-Gel Based Clear Top Coat. (Gloss-1-Gallon Calculation for theoretical coverage: 640 – 800 ft2/gal on Metal, 400 – 600 ft2/gal on Concrete @ Recommended spread rate 2 – 2.5 mils Wet, 0.7 – 0.75 mils Dry) Premera T2 MCM Can be applied on Ferrous metals including: Iron, steel, stainless steel, galvanized steel; Non-Ferrous metals including aluminum, copper, and bronze (raw, powder coated, painted or primed). Premera T2 MCM is the Ultimate Topcoat for Concrete Floors, structures, walls, masonry pavers, unglazed tile, bricks cement block, concrete that has painted, has epoxy or solvent based coatings, or applied to bare concrete that is sealed concrete with Nukote Premera Quick Seal for The Ultimate Topcoat Protection System. quantity
$ 165.00
Premera Coatings - Matting Agent - Mix the entire bag of matting agent with 1 gallon of Premera T2 MCM or Premea T9 VFC. Stir the agent into the desired product before application. Pump-spray application is recommended for a smooth and successful finish.
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 8.50
Premera Coatings - Matting Agent - Mix the entire bag of matting agent with 1 gallon of Premera T2 MCM or Premea T9 VFC. Stir the agent into the desired product before application. Pump-spray application is recommended for a smooth and successful finish. quantity
$ 8.50
World's Best Graffiti Removal System - Feltpen Fadeout (1 Quart) Feltpen Fadeout (FPFO) is designed for the final removal of shadows and traces of inks and dyes and other graffiti markers from all surfaces; porous and nonporous. FPFO will also remove some spray can stains / ‘ghosts’ (particularly reds) from delicate and porous surfaces, and is designed to work in conjunction with World’s Best Graffiti Removers. FPFO can be diluted with water to use as a high foaming cleaner for the removal of organic stains dirt and fats as well as sanitize surfaces killing microorganisms (germs, bacteria, fungi, etc.)
Sold By:
INDUSTRIAL SURFACE SOLUTIONS ®
$ 22.50
World's Best Graffiti Removal System - Feltpen Fadeout (1 Quart) Feltpen Fadeout (FPFO) is designed for the final removal of shadows and traces of inks and dyes and other graffiti markers from all surfaces; porous and nonporous. FPFO will also remove some spray can stains / ‘ghosts’ (particularly reds) from delicate and porous surfaces, and is designed to work in conjunction with World’s Best Graffiti Removers. FPFO can be diluted with water to use as a high foaming cleaner for the removal of organic stains dirt and fats as well as sanitize surfaces killing microorganisms (germs, bacteria, fungi, etc.) quantity
$ 22.50
Continue Shopping